|
Tags
|
|
|
|
Author: aluhm - Replies: 0 - Views: 2973
|
- Aluminum is a light metal, about the third of the density of steel, copper, and brass.
- Aluminum has good corrosion resistance to common atmospheric and marine atmospheres. Its corrosion resistance and scratch resistance can be enhanced by anodizing.
- Aluminum has high reflectivity and can be used for decorative applications.
- [font=Arimo, Arial, sans-seri
|
|
10 Characteristics of Aluminum
|
|
Aluminum in modern industrial applications is very extensive, and the main reason for the following characteristics:
1. Light weight aluminum accounted for one third of the steel plays a very important role in the transport and automation equipment.
2. The corrosion resistance of aluminum in the natural environment, the surface will be a thin layer of a natural oxide film is formed, can block the air to avoid further oxidation of oxygen, the corrosion resistance is excellent. Aluminum has
|
Author: aluhm - Replies: 0 - Views: 2034
|
Aluminum mold with high precision, long life, easy processing, can be recycled and many other features, in recent years is very popular with enterprises welcomed the mold varieties. In the aluminum series, the main mold for the manufacture of moderate hardness of the 5,6 alloy and the hardness of the 2,7-based alloy, the enterprise can be selected according to different needs.
2 series aluminum plate belongs to aluminum copper all
|
|
Which is more ductile between copper, aluminium and mild steel?
|
|
Mild Steel, Copper, Aluminum.
[size=medium][font=q_serif, Georgia, Times, 'Times New Roman', 'Hiragino Kaku Gothic Pro', Meiryo, serif]ductility measures the length of deformation without reaching failure (break). steel can be elongated greatly, though aluminum cannot. There are alloys that are more ductile than these and generally, steel is an alloy and not a pure metal like
|
|
Why use aluminum to make a wire?
|
|
Advantages of copper clad aluminum wire:
1. Dc resistivity: the dc resistivity of the copper clad aluminum wire is about 1.5 times that of the pure copper wire, and the copper clad aluminum wire is about 1/2 the weight of the pure copper wire. According to the "skin effect" calculation, the resistivity is the same as the pure copper wire at the high frequency of 5MHZ.
2. Good weldability: copper clad aluminum wire has the same solderability as pure copper wire due to its concentric coating of
|
Author: 1-LVDCPN - Replies: 0 - Views: 2299
|
|
Any buyer looking for copper wire scrap millberry 99.78 %
Origin Ghana
Price 3500$ per ton
Qty till 3000 tons monthly
[color=#1d2129][size=small][font=Helvetica
|
Author: 1-LVDCPN - Replies: 0 - Views: 2332
|
|
Hello everyone we have available copper wire above 10000T in Lucknow location.
Buyer must have a proper company with last 2 year itr.
Minimum order 2000T only .
If anyone intrested then contact me
Call/ WhatsApp +91 7052550572
[color=#1d2129][size=small][font=Helvetica, Arial, sans-
|
|
What are the advantage and disadvantage of aluminum as compared to copper?
|
|
The difference between aluminum and copper wire is largely in their usage within utilities, resistance, conductivity, weight and cost. Aluminum is in use by the utility companies for the transmission of electricity since the early 1900’s. Aluminum seems to have more advantages over the older copper wire in terms of weight, flexibility and cost, as it is lighter, more flexible, and less expensive.
[size=small][font=q_serif, Georgia, Times,
|
|
Why is aluminium preferred over copper for making a heat cable?
|
|
The difference between aluminum and copper wire is largely in their usage within utilities, resistance, conductivity, weight and cost. Aluminum is in use by the utility companies for the transmission of electricity since the early 1900’s. Aluminum seems to have more advantages over the older copper wire in terms of weight, flexibility and cost, as it is lighter, more flexible, and less expensive.
|
|
Why copper and aluminum are used in HVAC coils
|
HVAC coils are often made with copper and aluminum, two metals that efficiently transfer heat. That’s because cost and effective heat transfer are often the key deciding factors in choosing materials for HVAC coils. There are pros and cons to both copper and aluminum, which I describe below.
[color=#252525][size=medium][font='Open Sans', sans-ser
|
|
I have bought a 1.5 ton Voltas split ac with aluminium coil. What can I do?
|
|
|
|
Which is not a metallic mineral iron, copper, petroleum, and aluminium?
|
|
Petroleum is the odd one out, as it is a fossil fuel rich in carbon-hydrogen-rich organic compounds, and therefore not a metallic substance.
[size=medium][font=q_serif, Georgia, Times, 'Times New Roman', 'Hiragino Kaku Gothic Pro', Meiryo, serif]However, to be clear, your question should really be rephrased “Which one of these substances is not metallic: iron, copper, petroleum
|
Author: ohapuqa - Replies: 1 - Views: 2180
|
|
It is soft and malleable. Aluminium is used in a huge variety of products including cans, foils, kitchen utensils, window frames, beer kegs and aeroplane parts. This is because of its particular properties. It has low density, is non-toxic, has a high thermal conductivity, has excellent corrosion resistance and can be easily cast, machined and formed. It is also non-magnetic and non-sparking. It is the second most malleable metal and the sixth most ductile.
It is often used as an alloy because
|
|
What is the performance of prime aluminum sheet 6061?
|
[size=medium][color=#00bfff]Aluminum sheet 6061 has excellent machinability, good corrosion resistance, high toughness, no deformation after processing, easy coloring film, excellent oxidation effect and other excellent characteristics. It belongs to Al-Mg-Si series alloy, with medium strength, good plasticity and excellent corrosion resistance. Among the [url=http://www.thick-alum
|
Author: aadaasdark8072 - Replies: 0 - Views: 2514
|
It can be safely said that aluminum is the second most widely used metal in the world. For us at AAA Airsupport, aluminum is vital in our manufacturing of parts like roll form and [color=#18348f]aircraft extrusions Because of its physical properties, and the fact that it is the most common crustal metal on Earth, makes this fact seem obvious. However, this has not always been the case.[/color
|
Author: aadaasdark8072 - Replies: 0 - Views: 1611
|
|
Electronics has been playing a more and more important role currently. As for material in electronics, copper is not the only one. When compare to aluminum, copper is more heavy and expensive. There is an international trend that aluminum strip is replacing copper strip in electronics.
[size=x-small][font=Tahoma, Geneva, sans-serif]Aluminium strip is a type of high [url=http://www.huadongrivets.com/products/][color=#2eb98d][b]Aluminum
|
|
Aluminum alternative to other metals become a reality
|
|
aluminum resources relative to copper and other metal resources are much more abundant. Copper and nickel and other metals from the static reserves, the current exploitation of speed, only for decades of use around the world. While the existing reserves of bauxite can guarantee mining for hundreds of years. Aluminum resources than other metals available for a long time for the characteristics of the manufacturing industry for the selection of aluminum as a raw material provides a better conditio
|
Author: ohapuqa - Replies: 0 - Views: 1846
|
|
[color=#000000][size=4][font=Lato, 'Open Sans', Arial, sans-serif]Despite all the innovations in modern cookware, including non-stick surfaces and anodized aluminum, we believe that your healthiest cookware choices are those that use classic materials such as stainless steel and cast iron. What you want to look for when evaluating the healthfulness of cookware is whether the material that it is made from carries much toxic risk and how likely the cookware materials are to leach into the food dur
|
Author: 1-LVDCPN - Replies: 0 - Views: 3656
|
WE ARE SUPPLYING STAINLESS STEEL ALUMINIUM, COPPER, BRASS, GUN METAL, TITANIUM, BERYLLIUM COPPER, TUNGSTEN COPPER, NICKEL ALLOY, RAW MATERIAL.
SIR IF YOU HAVE ANY QUERY REGARDING THIS PRODUCT, PLEASE FEEL FREE TO CONTACT US.
Thanks & Best Regards,
Alloy Pipe Impex
Darshita Jain
+91 9619433944
www.alloypipeimpex.com
|
Author: 1-LVDCPN - Replies: 0 - Views: 1614
|
|
|
Author: 1-LVDCPN - Replies: 0 - Views: 1532
|
|
Radiators are made from aluminum and copper. Both these radiator materials have their own advantages and disadvantages. The aluminum and copper radiators differ in the strength, heat conductivity, appearance and weight.
Copper was the only material that was used to manufacture radiators in the earlier years. It was used because copper has superior heat conductivity.
One of the main differences between aluminum and copper radiators is seen in the tubes, which carry the coolant. In copper ra
|
|
Which will not rust? Copper, brass,aluminium
|
|
Copper, brass, and bronze do not rust for the same reason as aluminum. All three have a negligible amount of iron in them. Therefore no iron oxide, or rust, can form. However, copper can form a blue-green patina on its surface when exposed to oxygen over time.
|
|
Why aluminium tubes instead of copper for air conditioning?
|
|
Systems manufacturers used copper for automotive heat transfer tubing until they understood aluminium was superior as a material. HVAC & Refrigeration systems are not the same, but aluminium tubing is replacing copper for many of the same reasons.
The conversion of copper tubing to aluminium tubing in the automotive industry was completed decades ago. Now you find only all-aluminium heat exchanger units in the industry.
Aluminium tubes for HVAC systems
HVAC & Refrigeration systems are n
|
|
How to separate copper and aluminum from radiator scraps?
|
|
The scrap radiator dismantled from cars and air conditioner mainly made by copper , aluminum and iron.Therefore, there is big value if the radiators can be recycled. But how to separate copper and aluminum from scrap radiators? There are mainly three ways.
The first way is to dismantle radiators manually. But it's high labor cost and low efficiency. If there is a requirement for the processing capacity, manual dismantling of waste radiators simply cannot meet customer needs. So this method is
|
|
How to remove aluminum fins from copper tubing?
|
|
As we all know, air conditioner and car radiators contain metals copper aluminum and iron which have big value to recycle, but these radiators is hard to separate manually. How do you remove aluminum fins from copper tubing? Today I will introduce two mechanical ways to remove aluminum fins from copper tubing.
radiator recycling machine Scrap radiators and the separated copper aluminum & iron
The first way is using stripping type radiator separator machine to remove aluminum fins from copp
|