<p>
<strong>Aluminum circle discs</strong> are one of the most widely used
aluminum alloy strip deep processing products. Non-Stick aluminum circle/disk/disc are widely used in electronics, cosmetic, medicine, culture and education and auto parts. Electrical appliances, insulation, machinery manufacturing, automotive, aerospace, military, mold, construction, printing and other industries. Such as kitchen utensils such as non-stick pan, pressure cookers and other hardware products such as shade, water heater shell and so on.<br>
Aluminum round circles production:<br>
Punch processing<br>
1, rough material cut (cut into the side) 2, blanking (punching into the aluminum circle sheet you want)<br><br>
1, CNC automatic, the production line from the
aluminum coil from the volume, until the whole roll material all the completion of the middle of the blank does not require manual contact with any material, do not need any adjustment, fundamentally put an end to the ordinary punch punch production safety hazards and Product quality hidden.<br>
2, the line can use the
aluminum coil directly to the wafer production, do not need to roll the slitting and cross-cutting treatment, reducing the production process, reducing the cost of production and reduce the damage to the surface of the material may be produced
aluminium alloy circles to ensure that no oil, no scratches.<br>
3, the line full use of the width of the coil, the use of high-precision servo motor drive system control, the aluminum disc pitch and disc to the material edge of the distance to a minimum, fundamentally reduce the amount of waste, so that raw material utilization rate of 80% the above.<br>
4, the production rate can reach 40-55 per minute, to improve the production efficiency.<br>
5, due to the use of modular mold design, when the conversion of <strong>aluminum circle plate</strong> production specifications, the conversion time can be reduced to 15 minutes or less. The diameter of the aluminum circle plate can be produced from 85 mm to 750 mm.<br>
6, advanced open system, six heavy leveling machine, high rigidity of the mechanical presses, automatic palletizing system, to ensure that high quality aluminum circle.<br>
coating aluminum circles alloy state<br>
To 1 series, 3 series, 5 series, 6 series, 8 Department of the majority.<br>
State O, H and so on.<br>
Aluminum circle <strong>aluminium circle</strong> production line technical parameters:<br>
Roll material width (mm): 500-1250,800-1400,1000-1600<br>
Roll material thickness (mm): 0.4-3.0,1.0-6.0<br>
Roll material weight (kg): 8000,10000<br>
Blanking diameter (mm): 85-660,85-750,100-900<br>
Number of blanking (spm): 40-55<br>
Press nominal pressure (kN): 1250,1600,2000,2500</p>