<p style="clear: both; font-size: 16px; white-space: normal;"></p>
<p>
<strong>Flat
aluminum strips</strong> are widely used in industrial area, so they have strict quality requirements on the specification, surface, edge and performance. The thickness should be uniform, the width should be uniform, no color difference, no wrinkles, discounts, no cracks, burrs, at the edges. The end face is neat and free of channeling.</p>
<br><p>
The common terms for flat
aluminium strips are:<br>
Diagonal: the diagonal tolerance of
aluminum strips. Generally speaking, the diagonal tolerance of <strong>flat
aluminium strip</strong> cannot be greater than 2 mm, otherwise it will deform.<br>
Thickness tolerance: During the production process, there will be a certain gap in the thickness of flat
aluminum strips. According to the requirements, the thickness tolerance of
aluminum strips is usually within 0.8-1.0 mm (determined according to the thickness of
aluminum strips).<br>
Length and width tolerance: The gap between the length and width of
aluminum strip during the production process is usually implemented according to international standards.<br>
Tensile strength: that is, the hardness of the
aluminum strip. The higher the tensile strength of the
aluminum strip products, the greater the hardness and the smaller the elongation.<br>
Elongation: It reflects the range of use of <strong>flat
aluminum strips</strong>. Under normal conditions, the
aluminium strips has the largest elongation and is suitable for deep drawing products.</p>