RE: Aluminum alloy characteristics of different brands
aluhm > 02-25-2018, 06:33 AM
1000 series: representative alloy is 1050, 1060, 1070; It is also known as pure aluminum, and it belongs to a series with the highest amount of aluminum in all series, and the purity can reach over 99.00%. Since there are no other elements, the production process is relatively simple. 1000 series aluminum plate according to the last two digits to determine the range of low aluminium content, such as series 1050, the last two digits for 50, according to the international brand naming principles, aluminum content must be above 99.5%. 1000 series is given priority to with aluminum belt, good molding (stretch), corrosion resistance, conductivity and high thermal conductivity, but the lowest hardness, is often used in lighting appliance, baffle plate, decoration, chemical industry, container, radiator, signs, nameplate, electrical appliances, stamping parts, etc.
2000 series: representative alloy has 2011, 2017, 2024, 2A12 (LY12); It is commonly known as "hard aluminum", which is a heat-treatable and strengthened aluminum alloy of al-cu-mg system. Copper and magnesium are the main alloy elements, and copper can improve the strength and hardness of the alloy. It has high modulus of elasticity, good weldability, general corrosion resistance and obvious aging properties. Anodic oxidation treatment, coating method or surface coated aluminum layer is often used to improve its corrosion resistance. 2000 series belong to the aviation aluminum, is used to make all kinds of high load of parts and components, such as plane frame parts, skin, frame, ribs, SPAR, rivets and other working parts below 150 ℃; It is also widely used in the production of sensor parts.
3000 series: the representative alloy is mainly 3003; Manganese is the main element, the content is between 1.0-1.5%, the anti-rust function is better. It can be used in flying machine oil seamless tube (3003 alloy), can (3004 alloy) and other fields.
4000 series: represents alloy 4032; It is mainly silicon, which belongs to a series of high silica content, which is usually between 4.5 and 6.0%, with low melting point and good corrosion resistance. Often used in construction, mechanical parts forging materials and welding materials.
5000 series: the representative alloy is 5052, 5056, 5083, 5754; The main elements are magnesium, and magnesium content is between 3-5%, which is called aluminum magnesium alloy. It belongs to heat treatment unreinforced aluminum alloy. Magnesium can significantly improve the strength of aluminum without reducing its plasticity. It has good corrosion resistance and weldability, and its strength is high after welding. It has great corrosion resistance to seawater and industrial environment. The main features are low density, high tensile strength, high elongation and good fatigue resistance. It is used for the welding parts of ships, ships, automobile and aircraft plate, communication microwave equipment, test and fixture mechanical parts, rust preventive equipment, etc. Extrusions are often used in areas such as optical lenses.
6000 series: the representative alloy is 6061, 6063, 6082, 6005; Mainly contains two elements, magnesium and silicon department alloy extrusion is good, has a medium strength, high corrosion resistance, which has the best comprehensive performance and fuel economy, applies to have a certain strength requirements and high resistance to corrosion of all kinds of industrial structures, such as manufacturing truck, tower building, vessel, trolley, railway vehicle, furniture, machinery parts, precision mold manufacturing, electronic components and precision instruments, SMT solder, PC board vehicle electronics and so on.
7000 series: representative alloy is 7050, 7075; It mainly contains zinc. Also belongs to aviation series, commonly known as "super hard aluminum", is one of the most powerful aluminum alloys; With high cutting and high wear resistance, the strength is far better than soft steel; Has the general corrosion resistance, good mechanical properties and the anodic reaction, on behalf of the purpose of aerospace, mould processing, mechanical equipment, fixture, especially used in the manufacture of aircraft structure and other requirements of high strength high stress structure.