The conventional thickness of aluminum diamond tread plate is 0.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, 6mm. The cheap one is 1060 5 bar aluminum tread plate, but for special places requiring high strength or high corrosion resistance, 5052 or 6061 aluminum plate are a better choice, which has excellent corrosion resistance.For places that are suspended in the air and need to be stepped on by staff, it is recommended to use alloy series, and the thickness is not less than 1/4 inch. The common choice is: 4x8 sheet of 1/4 inch aluminum. This series and thickness can ensure the safety of the staff to the greatest extent, and at the same time ensure the service life of the aluminum tread plate.Patterns5bar aluminum tread plate is cheap and has good anti-skid effect. It is divided into large 5 bar and small 5 bar. The pattern length of the big 5 bar is about 42mm while the length of the small 5 bar is about 35 mm. The height of the pattern is about 0.8 mm.Aluminum tread plate priceThe unit price of aluminum tread plate =aluminum ingot price + processing fee. The processing fee of aluminum plate of different alloys is different. When we buy the patterned aluminum plate, we must first figure out the material of the patterned aluminum plate. The performance of the patterned aluminum plate is different with different materials.Applications1. As a transportation facility for vertical traffic and urgent evacuation of people, stairs have a large flow of people and steep slopes, which are prone to danger in use. Therefore, it is necessary to use aluminum diamond plate.2. We can often see the aluminum diamond tread plate at the bottom of the car when we take the bus. When the driver encounters an emergency while driving and applies sudden brakes, or when the car is going uphill or downhill, installing aluminum checker plate can prevent passengers from falling forward due to inertia.