| Welcome, Guest |
You have to register before you can post on our site.
|
| Online Users |
There are currently 109 online users.
» 0 Member(s) | 108 Guest(s)
Bing
|
| Latest Threads |
Lightweighting Tanker Tru...
Forum: aluminium faq
Last Post: toyota1515
11-12-2025, 07:59 AM
» Replies: 0
» Views: 716
|
3003 Aluminum Tread Plate...
Forum: aluminium faq
Last Post: mtaluminum
11-12-2025, 07:16 AM
» Replies: 0
» Views: 383
|
6061 Aluminum Plate for A...
Forum: aluminium faq
Last Post: mtaluminum
11-06-2025, 01:32 AM
» Replies: 0
» Views: 1,010
|
Non-Slip Aluminum Plate S...
Forum: aluminium faq
Last Post: mtaluminum
11-04-2025, 08:41 AM
» Replies: 0
» Views: 893
|
5052 aluminium strip for ...
Forum: aluminium faq
Last Post: mtaluminum
11-03-2025, 01:32 AM
» Replies: 0
» Views: 880
|
High-Quality 8011-O Alumi...
Forum: aluminium faq
Last Post: toyota1515
10-31-2025, 09:25 AM
» Replies: 1
» Views: 1,316
|
latest Heavy Duty Aluminu...
Forum: Knowledge & Technique
Last Post: askaluadmin
10-31-2025, 09:22 AM
» Replies: 2
» Views: 203
|
Battery Flexible Connecti...
Forum: aluminium faq
Last Post: toyota1515
10-31-2025, 09:13 AM
» Replies: 1
» Views: 1,070
|
5182 Aluminum Alloy for C...
Forum: aluminium faq
Last Post: mtaluminum
10-28-2025, 02:24 AM
» Replies: 0
» Views: 941
|
The advantages of anodize...
Forum: Knowledge & Technique
Last Post: toyota1515
10-15-2025, 09:24 AM
» Replies: 0
» Views: 252
|
|
|
| What Is The Wide Application of Aluminum Strips |
|
Posted by: elenavm11 - 12-08-2020, 08:18 AM - Forum: Knowledge & Technique
- No Replies
|
 |
Aluminum strip is made of pure aluminum or aluminum alloy col which is rolled into a thin aluminum coil of different thickness and width by a cold rolling machine, and then longitudinally slit into different widths by a slitting machine according to the uses.Aluminum strip for face maskWith the outbreak of COVID-19, medical masks such as N95 mask has been a daily necessity for most people. In addition to the 95% filtration efficiency, another factor for the good protection of N95 masks is its close contact to the face. That’s owed to the function of aluminum nose wire.To make smooth aluminum nose wire with good adhesion, we need to choose quality aluminum strip for masks. 1060 and 3003 aluminum strip are the popular choices. The width is 90-100 mm. The thickness is 0.4-0.5 mm.Aluminum strip for transformerAluminum strip is a key raw material for manufacturing transformer winding and it is obtained by rolling aluminum ingots. It is divided into different grades, specifications and conditions according to the use.The aluminum strip for dry-type transformers is generally 1060 aluminum strip. Its aluminum content of more than 99.6%, which belongs to a commonly used pure aluminum strip. Its production process is relatively simple, technology is relatively mature, and price has a huge advantage over other high-grade alloy aluminum strips.With good elongation and tensile strength, it can fully meet the conventional processing requirements. Other types of aluminum strips used for transformer are 1050,1070 and 1035 aluminum strips.Aluminum strips for capsThe waste in production is always a troublesome problem for the aluminum products manufacturers. If there is too much waste in production, it will increase the cost of the product virtually.At this time, aluminum strip with proper size will effectively reduce waste and cost, so for some lamps and caps manufacturing enterprises, it is recommend to use aluminum strips.
|
|
|
| 5083 Aluminum Plate for Freight Car |
|
Posted by: etyhyt - 12-08-2020, 08:18 AM - Forum: Knowledge & Technique
- No Replies
|
|
Replacing steel with aluminum is the general trend of the vehicle manufacturing industry, no matter it is small cars, trucks or tank cars. The common aluminum alloy sheets are 5083 aluminum plate and 5754 aluminum sheet.The aluminum alloy carriage panel has the advantages of light weight, crash resistance, and high recycling value. It is undoubtedly the ideal material for lightweight vehicles. Today we will introduce the application of the 5083 aluminum plate in the freight car.The 5083 aluminum sheet belongs to Al-Mg-Si alloy. Its application belongs to the high-end field of the aluminum processing industry. With the vigorous development of the rail transportation and the arrival of the global automotive era, it has great market prospects.For meeting this need, Haomei Aluminum has optimized the production process of 5083 aluminum alloy through the determination of alloy composition, optimization of melt casting process, homogenization heat treatment and rolling process test.The advantages of 5083 aluminium plate in the freight truck:1. Good processing performance. 5083 aluminum plate has good oxidation resistance, corrosion resistance, good rust resistance and easy processing performance, which contributes to save production cost.2. Obvious lightweight advantage. The freight car made of China 5083 aluminum sheet greatly reduces the weight of the vans, which is very helpful to reduce fuel consumption and gas emission.3. The aluminum alloy freight car is about 40% lighter than the traditional steel plate freight car, and more cargo is loaded, which reduces operating costs.The thickness of Haomei 5083 aluminum sheet is 0.5-600 mm, width is 500-3100 mm. Welcome to inquire 5083 aluminum sheet price from us directly.
|
|
|
|
| 5083 Aluminum Sheet for Gas Cylinder |
|
Posted by: Melissashisp - 12-08-2020, 08:18 AM - Forum: Knowledge & Technique
- No Replies
|
|
The gas cylinder made of 5083 aluminum sheet has the advantages of corrosion resistance, easy cleaning, light weight and long service life. Aluminum alloy plays an important role in reducing the total weight of the vehicle and the trouble of maintenance.5083 aluminum plate is well known for its anti-rust performance. It naturally forms a dense and firm protective film on the surface of the automobile gas cylinder, which can protect the gas cylinder itself from corrosion, thereby prolonging its service life.In addition, 5083 aluminum alloy is of medium strength, good processing performance, and high elongation, which can reduce the difficulty of processing and reduce the weight of the vehicle. It can also be used for LNG storage tanks, marine aluminum plates, GIS shells, flange materials, etc.As for the 5083 aluminum sheet price, since different manufacturers have different product quality, processing craft and selection of raw material, the pricing is naturally different. Only under the premise of good quality, the comparison of the price is meaningful.With over 20 years’ experience, Haomei Aluminum has mature processing technology of 5083 aluminum sheet. Haomei 5083 gas cylinder aluminum plate has good processing effect, stable performance and big economic benefits. If you need special specification, welcome to contact us directly.
|
|
|
|
| Why to Choose Hydrophilic Aluminium Foil for Air Conditioner Fin |
|
Posted by: shellyya18 - 12-08-2020, 08:17 AM - Forum: Knowledge & Technique
- No Replies
|
|
The aluminum foil for air conditioner is mainly divided into two types: plain aluminum foil and hydrophilic aluminium foil due to their different performance. Plain aluminum foil refers to the rolled and annealed aluminum foil without any surface treatment, and is mainly used for low-grade split air conditioner outdoor units and window-type air conditioner.In recent years, with the improving requirements for energy-saving, environmental protection and corrosion and bacteria resistance, the plain aluminum foil gradually can’t satisfy the need. That’s why more and more air conditioner manufacturers choose hydrophilic aluminum foil.The surface of the hydrophilic foil has a strong hydrophilicity. The water droplets condensed on the radiator are easy to spread and flow down, avoiding affecting the ventilation effect of the radiator, so that the heat exchange efficiency is increased by 5%.In addition, the hydrophilic coated foil is of strong corrosion resistance, great bacteria resistance and no odor, which is mainly used for high-end air conditioners. Hydrophilic aluminum foil is to do hydrophilic treatment for the aluminum foil, which is coated with an anti-corrosion coating and a hydrophilic coating and is dried in a drying furnace.Because the surface is coated with a hydrophilic layer, the condensed water will quickly spread on the hydrophilic aluminum foil and will not condense into water beads, accelerating the cooling and heating speed and effectively avoiding the noise of air flow caused by the obstruction of the condensed water.The main advantages of hydrophilic aluminum fin stock:1. Excellent hydrophilicity and corrosion resistance.2. Good formability and no abrasion to the mold.3. Extremely strong resistance to stamping oil, solvent and heat.4. The air flow resistance is small, and the heat exchange rate can generally be increased by 10%-15%.
|
|
|
|
| The Properties of Hydrophilic Aluminum Foil |
|
Posted by: KatrinLefr - 12-08-2020, 08:17 AM - Forum: Knowledge & Technique
- No Replies
|
|
The hydrophilic aluminum foil has strong hydrophiicity. It can be used in air conditioning to optimize the ventilation effect of the heat exchanger, thereby increasing the heat exchange rate by 5%.In addition, the aluminum fin stock also has other advantages such as anti-corrosion, bacteria resistance and no odor. It is mainly used in high-end air conditioner, refrigerators, automobile air conditioners and automobile water tanks. Welcome to know its properties through the following table.Item of converter foilTechnical parameterFilm thickness1.0-20 µmHydrophilicity Initial hydrophilic angle ≤10°, continuous hydrophilic angle ≤20°AdhesionErichsen test(5 mm deep):no flaking, no delaminationCorrosion resistanceRN≥9.5(72 hours)Alkali resistanceThe coating is completely no bubble after being immersed in 20% NaOH at 20℃ for 3 minutesSolvent resistanceSample weight loss ≤1%Heat resistanceAt a temperature of 200℃ for 5 minutes, its performance and color are unchanged. At a temperature of 300℃ for 5 minutes, the coating film is a little yellowish.Oil resistanceThe coating is without bubble after a 24-hour immersion in volatile oil.Odor OdorlessWear on the moldThere is less wear on the mold.
|
|
|
|
| The Developing Trend of Air Conditioner Foil |
|
Posted by: SPatruste - 12-08-2020, 08:17 AM - Forum: Knowledge & Technique
- No Replies
|
|
In recent years, with the continuous development of he air-conditioning industry, the manufacturing of air conditioner foil has also developed very rapidly. The early aluminum foil used for air conditioning was made of pure aluminum such as 1050 aluminum foil.However, with the continuous improvement of air conditioning production technology, the air conditioning fins have undergone major changes. The original 1000 aluminum foil can no longer meet the requirements of air conditioner aluminum foil.The aluminum foil manufacturers are constantly looking for breakthroughs in alloy composition. With the addition of Fe and Si, we get a 8011 aluminum foil. Its tensile strength is 125-165, yield strength is 110 and the elongation is 2-5. It has strong mechanical properties, good tensile strength and easy to process.Another two kinds of aluminum fin stock are 3003 and 3102 aluminum foil. 3102 aluminum alloy fin stock is one higher strength aluminum alloy having good corrosion resistance. 3003 aluminum alloy has good formability, few metallurgical defects, uniform thickness, and good flatness.Through the research on the different alloys, the strength and toughness of the hydrophilic aluminum foil has bee improved greatly. At the same time, the trend of thinning the thickness of aluminum foil for air conditioner is particularly obvious.The amount of aluminum foil used for air conditioner varies greatly depending on the model and power. The thinner aluminum foil can reduce the amount of aluminum used and reduce the cost of air conditioning radiators under the same heat exchange area.As a big aluminum foil producer, Haomei has introduced the word-class foil rolling mill and adopted ANDRITZ rolls, a guard for the high quality aluminum foil. The aluminum fin stock is flat and free of defects such as black oil spots, small black silk, bright lines, burrs,etc.
|
|
|
|
| How to Choose Aluminum Plate Thickness |
|
Posted by: owema - 12-08-2020, 08:17 AM - Forum: Knowledge & Technique
- No Replies
|
|
The aluminum sheet industry has some knowledge of general aluminum plate thickness. The requirements for the thickness of aluminum sheets are different when used in different occasions, and different types of aluminum plates also have corresponding thickness requirements.Although the aluminum sheet thickness does not affect the appearance, it will affect the deformation resistance and service life of the aluminium sheet, especially for the perforated aluminum sheet.Roofing Aluminum SheetIt has relatively high requirements for thickness. If the thickness is too thin, it is easy to deform. Therefore, it is recommended that you use aluminum with a thickness of more than 2.0 mm such as 3 mm aluminium plate.Hollow Aluminum PlateLarge-area carving will reduce the deformation resistance and rigidity of the aluminum plate. Therefore, when choosing carved aluminum sheet, we nee to choose a thick aluminum plate, such as aluminum sheet 2.0mm or more thick.Perforated Aluminium PlateSince it has a hole design, many people like to choose perforated aluminium plate. This choice is not necessary in some cases that it is a micro punching. If the stamping rate ratio is relatively large, and the area is relatively large, the thick aluminum plates are needed for processing. But if it is used indoors, there is no need to think too much about the thickness.Welding PlateSome shape design need to be achieved by the welding of aluminum sheets. But because the temperature during welding will be very high, the thin aluminum plate is likely to be deformed during the welding process, so the welded plate is usually made of the thick aluminum plate.
|
|
|
|
| Aluminium Plate Thickness |
|
Posted by: danderson1 - 12-08-2020, 08:17 AM - Forum: Knowledge & Technique
- No Replies
|
|
According to the aluminum plate thickness, it can be divided into thin aluminum sheet, standard aluminum sheet and thick aluminum sheet. The thickness below 1mm belongs to thin plate, and the thickness between 1mm-8mm belongs to standard plate and that above 8mm is thick aluminum sheet.This classification is mainly based on the processing craft. For example. The aluminum plate within 8 mm can be processed by cold rolling equipment, which is of relatively low cost while that above 8 mm or more must be manufactured by hot rolling equipment.The aluminum sheet thickness has close relationship with the price. The price of 1-8 mm aluminum sheet is the most economic. The thinner plate has a relatively high price because of more processing steps.As for aluminum plate exceeding 8mm, it must be produced by hot rolling after ingot processing, which will cause certain losses during the ingot casting process. At the same time, the price of hot rolling equipment is relatively high, so the price of super thick aluminum plate will be also high.The flatness of aluminum plates below 1 mm needs to be paid attention to. Nowadays, many small processing factories don’t have stretch-bending and straightening equipment. For products below one millimeter, the flatness cannot be guaranteed. So if you want to buy 1mm aluminium sheet, finding a big aluminum sheet manufacturer such as Haomei Aluminum will be better.There is no inevitable relationship between thickness and rolling process. Not all thin aluminum sheets are cold-rolled, because hot-rolled aluminum coils can also be further processed by cold-rolling equipment to become hot-rolled thin aluminum sheets.However, it is certain that the aluminum plate above eight millimeters is hot-rolled aluminum plate, because cold-rolling equipment cannot produce aluminum sheet with a thickness greater than that. The aluminum plate thickness of Haomei Aluminum is 0.15-350 mm. Welcome to contact us by leaving message.
|
|
|
|
| Aluminum Checker Plate Thickness and Alloys |
|
Posted by: NellieFlege - 12-08-2020, 08:17 AM - Forum: Knowledge & Technique
- No Replies
|
|
The aluminum checker plate refers to the aluminum plate with a thickness in the range of 0.2-500 mm, the width of 200mm and the length of 16m. It is of rich patterns such as diamond, five bar, orange peel,etc.According the the thickness, the aluminum tread plate can be divided into thin aluminum sheet, standard aluminum sheet, medium aluminum sheet and thick aluminum sheet. Thin aluminum sheet is between 0.15mm and 2.0mm. 2mm aluminium checker plate is a commonly used kind.The thickness of the standard plate is between 2.0mm and 6.0mm. The aluminium checker plate 6mm is also a popular kind among customers. The medium aluminum sheet is between 6.0mm and 25.0mm, and the thickness of the thick plate is between 25mm and 200mm.During the manufacturing process, the common sizes are 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 7.0mm, 8.0mm, and its width must be within the range Between 600mm-1800mm.According to alloys, it can be divided into ordinary aluminum plate,Aluminum-manganese embossed aluminum sheet and Aluminum-magnesium stucco embossed aluminum sheet.Ordinary series: it is made of 1060 aluminum alloy plate, which can adapt to the normal environment and is of low price. It is often used in outer packaging.Aluminum-manganese series: Its typical one is 3003 aluminum diamond plate. It belongs to an anti-rust aluminum sheet. The strength is slightly higher than that of ordinary aluminum tread plate.Aluminum-magnesium alloy: it is processed from 5 series aluminum sheet such as 5052 or 5083 aluminum sheet. This series has good corrosion resistance, high hardness and excellent rust resistance, which is usually used in special places, such as ships, carriages and other humid environments.
|
|
|
|
| Aluminum Plate Thickness for Curtain Wall |
|
Posted by: LynellGwyn - 12-08-2020, 08:17 AM - Forum: Knowledge & Technique
- No Replies
|
|
No matter where you go, you can see high-rise buildings with aluminum curtain wall. For he customers, how to choose aluminum plate thickness is very important. The thickness of typical aluminum sheet is varies from 0.6 mm to 5 mm. Are there some methods for choosing the aluminum sheet with right thickness?The aluminum plate for curtain wall adopts high-quality and high-strength aluminum alloy panels. The common ones are 1.5, 2.0, 2.5, and 3mm aluminum sheet. Alloy is 3003 and the temper is H24.For the construction of the outer wall of our house, the choice of the thickness of the outer wall aluminum plate is very important. Generally speaking, the thickness should exceed 2.5 mm. In terms of service life and safety, aluminum sheet with a thickness of less than 2.5 mm have almost no protection, because a little heavy rain during summer thunderstorms will cause fatal damage to aluminum panels.Thin aluminium sheet can be considered for interior decoration, but this is not absolute. In places with damp or corrosive gases or liquids, thick aluminum plates should be used to make them more corrosive and ensure a longer service life. When there are no special circumstances, you can pay more attention to the decorative effect and cost-effectiveness.Some customer inquire us if the aluminum plate can be thick. This is certainly possible, but not practical. It is not only a waste of the cost, but also completely violates the rules of decorative materials.The features of aluminum plate for curtain wall is light weight. Too thick aluminum plate not only make transportation inconvenient, but also make the installation difficult. In addition to the thickness, finding a reliable aluminum sheet manufacturer will be a big guarantee.
|
|
|
|
|