The
aluminum strip roll is made from pure aluminum or
aluminum alloy cast-rolled coils or hot-rolled coils which are rolled into thin
aluminum coils of different thickness and width by a cold rolling mill, and then longitudinally slitted into different widths by a slitting machine according to the purpose.The factors influencing the
aluminum strip price includes
aluminum alloy, thickness, and width. It is recommended that the customers buy
aluminum strips according to actual needs. The
aluminum strip price of the same alloy will be different due to the different width and packaging methods.In principle, the smaller the width and the smaller the inner diameter, the higher the price. The common width is more than 200mm, and the commonly used inner diameter is 500mm. Therefore, it is recommended that if the customers has no clear requirements for the inner diameter, the inner diameter of 500mm can be selected.In addition, we all should have a clear idea that a reasonable price is a guarantee for the quality. During the manufacturing process, we should have a strict control of the whole process. The current
aluminum strip slitting machine can control the width tolerance between 0.05-0.1mm, so the slitting unit must be set by the operator and can only start production after correction. No large deviations is allowed.The burr on the edge of the
aluminum strip is mainly caused by the cutting tool. If the burr on the edge of the track is found to be serious, we need to stop production immediately and find the cause.As a big
aluminum strip supplier, Haomei Aluminum has different alloys and specifications of
aluminum strips for sale. Welcome to leave message below to get the latest price.