Vertical locking roofing accessories
toyota1515 > 03-06-2018, 07:02 AM
T bearing is also called the aluminium alloy support, was made by aluminum alloy, commonly used specifications is 75 mm, 110 mm, 165 mm (the height of the bearing is by heat preservation cotton height and high magnesium aluminum manganese alloy rib plate, or H = H1 + H2, H is the height of the aluminium alloy support, H1 for heat preservation cotton height, H2 high manganese plate rib) for aluminum and magnesium. There are also many types of t-type supports, except for the t-type, the commonly used ones are opposite, solar supports and so on. The aluminum alloy support is mainly used to support the roof panel in the whole roof system (the aluminum magnesium manganese plate is directly buckled on the t-type pedestal, and then the clamping machine should be tightened.) It is more scientific and waterproof than a regular roof.
The installation of the t-type support: it is fixed directly on the purline by screws, and it should be ensured to be perpendicular to the purline at the fixed support, and the support is parallel to the support. The selection of the installation time distance of the aluminum alloy support is felt by the width of the roofing plate of the aluminum magnesium and manganese alloy (for example, the distance between the supporting seat of yx65-430 aluminum magnesium manganese plate should be 430mm. The upper and lower spacing is 1000mm~1500mm and the design standard is 1200mm. The system adopts vertical locking to hold the pressing plate. This kind of fixed mode belongs to the floating design concept, that is, the roof board can slide freely on the fixed pedestal, completely eliminating the influence of metal thermal expansion and contraction. At the same time, this fixed way makes the whole system not a single screw that penetrates the roof, making the roof waterproof, wind resistant and corrosion resistant. Aluminum magnesium manganese plate color coating, performance, pressure type.