The process of anodising aluminium drawing
haomeialu > 02-06-2018, 08:28 AM
The process of anodising aluminium drawing is mainly about surface treatment of aluminium plate
Anodising of drawing technology has become the industry's a very important mechanical processing link, because by anodising brushed aluminium plate is not only the surface looks beautiful appearance generous, and also has many advantages in the application process, compared with the other plate is much longer service life.Because the plank after anodising is especially suitable for used in some special environment, in the aviation design and manufacture many parts will use the brushed anodising aluminium, even some environment is bad weather or under pressure, brushed anodising aluminium also won't appear deformation.Despite the excellent performance of the anodising aluminium plate, there are many matters needing attention during the anodising process.
And what are the things that we need to pay attention to during the whole production process?One of the most critical is the anodising surface treatment technology, about the process, we is the most easy to understand and master the anodising aluminium surface polishing, because of the anodising process itself is a kind of surface with metallic simple sense and look round plate, so in each brushed anodising aluminium production is completed, is there will be a polishing process, on the plank after polishing is what is a complete anodising brushed aluminium plate.Of course, in addition to the above procedures, we also have degreasing, silk, pickling, cleaning and other steps and procedures are indispensable in the process of surface treatment.
So anodising brushed aluminium plate, the key lies in surface treatment and surface treatment requirement is very high, but at present a lot of processing enterprises for the above process have standardized operation, in most of the factories have adopted the machinery to replace manual operation link, but need to be worth what carry is, as long as a process problem, will directly influence the final effect of anodising brushed aluminium plate.