The advantages of aluminum products
toyota1515 > 11-10-2023, 07:42 AM
1. Low density. The density of aluminum is about 2.7 g/cm3. Its density is only 1/3 that of iron or copper.
2. High plasticity. Aluminum has good ductility and can be made into various products by pressure processing methods such as extrusion and stretching.
3. Corrosion resistance. Aluminum is a highly negatively charged metal, and a protective oxide film will be formed on the surface under natural conditions or anodization, and it has much better corrosion resistance than steel.
4, Easy to strengthen. Pure aluminum is not very strong, but it can be increased by anodizing.
5. Easy surface treatment. Surface treatments can further enhance or alter the surface properties of aluminum. The aluminum anodizing process is quite mature and stable in operation, and has been widely used in the processing of aluminum prod
Casting process:
(1) The furnace temperature needs to reach 1200°C. The melting point of aluminum is between 750°C and 800°C. Other alloys with higher melting points need to be fused together with other alloys and aluminum. The furnace temperature must be higher than the melting point of the alloy to complete the melting of the alloy to be effective fusion with aluminum.
(2) Large ingots are used to make aluminum plates, large cast bars are used to extrude aluminum bars, and cast-rolled coils are used to make low-demand aluminum plates of series 1 and 3.