[*] Key points of
Aluminum sheetand use:
1.
Aluminum sheet storage: The sheet should be stored in a dry and ventilated place, and flat on the surface, do not trample, impact.
2.
Aluminum sheet handling: the four sides of the plate should be lifted at the same time to avoid scratching the surface of the plate.
3.
Aluminum sheet grooving: When grooving with slotting machine or Gong machine, the semi-circular head type milling cutter should be used. Neither too deep damage to the aluminum plate nor too shallow to make it difficult to fold, 0.2-0.3MM thick plastic core should be left along with the aluminum plate to increase strength and toughness. Otherwise, the aluminum plate may break or the paint film may burst when bending.
4.
Aluminum plate bending: when bending edge, force should be uniform, forming once, do not bend repeatedly, otherwise the aluminum plate may break.
5.
Aluminum sheet are processing: special bending equipment should be used to process the arc, so that the plate gradually reaches the required surface. Do not bend once.
6. Aluminum plate batches: There may be color difference in the same type of sheets with different batches. When selling and using different batches of sheets, the procedure of color difference comparison should be increased. Our company mainly deals in alloy aluminium plate, aluminium pattern plate and so on. Only when there is no visual color difference, can it be used on the same plane.
7. Aluminum plate installation direction: When the same color aluminum plate is installed on the same plane, the flow direction should be the same, otherwise visual color difference may be created.
8. Aluminum sheet tear film: The protective film should be torn off within 45 days after the installation of the aluminum sheet, otherwise the tear film may be difficult or the glue transfer may occur.
9. Conditions for use of aluminium sheets: The interior wallboard should be used indoors, not outdoors, in order to ensure the use effect and service life.
Grade of
4mm 5mm 6mmm 8mm 12mm 15mm 20mm aluminium plate supplier :
1000,2000,3000,4000,5000,6000,7000 series
Specifications aluminum plate :
Thickness: 0.13-1.35mm
Type:coil/sheet/strips
Width:600-1500mm
Coil ID :508mm or 601mm
Coil Weight :3-8MT
Our aluminum products: