How to measure the weight of a 4×8 aluminum sheet?How much does a 4×8 aluminum plate weigh? How to measure the weight of a “1/4 inch 4×8 aluminum sheet” size. To measure the weight of a “1/4 inch 4×8 aluminum sheet”, there are two methods:
1. Using a weighing scale:
This is the most common method. Place the entire aluminum plate on the scale and record the reading. Make sure to set the units to the appropriate weight unit (such as pounds or kilograms) to get the correct weight.
2. Weight = Volume x Density
To measure the weight of a “1/4 inch
4×8 aluminum sheet”, you need to know its length, width and thickness, and use the following formula to calculate:
Among them, the area is equal to the length multiplied by the width, and the density is the density of aluminum, which is about 2.7g/cm³ (2.7×10³g/m³)
Assuming the
aluminum sheet is 8 feet (96 inches) long, 4 feet (48 inches) wide, and 1/4 inch (0.25 inch) thick, the calculations can be done as follows:
Converting inches to feet gives the aluminum sheet a length of 8 feet, a width of 4 feet, and a thickness of 0.0208 feet.
To calculate the area, area = 8 feet x 4 feet = 32 square feet.
To calculate volume, volume = area x thickness = 32 square feet x 0.0208 feet = 0.6656 cubic feet.
To calculate weight, weight = volume x density = 0.6656 cubic feet x 2.7 g/cm3 x 0.0353 oz/g = 6.4 lbs (approximately 2.9 kg).
So this “1/4 inch
4×8 aluminum sheet” weighs about 6.4 lbs.