<p style="clear: both; font-size: 16px; white-space: normal;"></p>
<p>
Haomei supply <strong>supply
aluminium strip</strong> 1060, 1070, 3003, 3104 and 8011 for applied in transformer, cable, pp caps, lamp base and so on. Aluminium strip is an aluminum deep-processed product formed by
aluminum coil slitting and is an important raw material in industry. Using
aluminum alloy instead of steel materials can reduce the structural weight by more than 50%. It is widely used in machinery manufacturing, transportation machinery, power machinery and aviation industry. The fuselage, skin, compressor, etc. of aircraft are often made of
aluminum alloy to reduce self-weight. Aluminum alloy has low density but relatively high strength, which is close to or exceeds that of high-quality steel. It has good plasticity and can be processed into various profiles. It has excellent electrical conductivity, thermal conductivity and corrosion resistance. It is widely used in industry and its usage is second only to steel.</p>
<br><br><br><p>
As an manufacturer who supply
aluminium strip, Haomei Aluminum pay attention to the three major issues in
aluminum strip slitting processing:<br>
1, Width, the current <strong>
aluminum strip</strong> slitting machine can control the width tolerance between 0.05-0.1mm, so the slitting unit must be set by the operator and can only start production after correction, and the problem of large dimensional deviation cannot occur.<br>
2, Because the
aluminum strip is soft, avoid bumping during packaging and moving. The bumped
aluminum strip will form pits on the surface, which directly affects the use.<br>
3. The burr on the edge of the <strong>supply
aluminum strip</strong> is mainly caused by the cutting tool. If the burr on the edge of the crawler is found to be serious, stop production immediately and find the cause.</p>