Haomei aluminium a wide range of aluminum alloy sheet products. Contact us to find exactly what your application calls for and how we can expertly process to your requirements… we’ve got you covered. The following is general information on the various aluminum alloys and grades, and their typical applications.
General Information of Aluminum Alloy sheet
Aluminum alloy sheet is a kind of industrial building materials, which can be used in various industries according to different materials. According to the surface treatment method, it can be divided into two categories: non painted products and painted products.
In general, the two broad categories of aluminum alloys are wrought alloys and casting alloys. Both of these groups are subdivided into heat-treatable and non-heat-treatable types. Around 85% of aluminum is used in wrought alloys. Cast alloys are relatively inexpensive to produce because of their low melting point, but they tend to have lower tensile strengths than their wrought counterparts.
List of Aluminum Alloy sheets:
- 1xxx: Controlled unalloyed (pure) composition, used primarily in the electrical and chemical industries
- 2xxx: Alloys in which copper is the principal alloying element, although other elements, notably magnesium, may be specified. 2xxxseries alloys are widely used in aircraft where their high strength (yield strengths as high as 455 MPa, or 66 ksi) is valued.
- 3xxx: Alloys in which manganese is the principal alloying element, used as general-purpose alloys for architectural applications and various products
- 4xxx: Alloys in which silicon is the principal alloying element, used in welding rods and brazing sheet
- 5xxx: Alloys in which magnesium is the principal alloying element, used in boat hulls, gangplanks, and other products exposed to marine environments
- 6xxx: Alloys in which magnesium and silicon are the principal alloying elements, commonly used for architectural extrusions and automotive components
- 7xxx: Alloys in which zinc is the principal alloying element (although other elements, such as copper, magnesium, chromium, and zirconium, may be specified), used in aircraft structural components and other high-strength applications. The 7xxx series are the strongest aluminum alloys, with yield strengths ≥500 MPa (≥73 ksi) possible.
- 8xxx: Alloys characterizing miscellaneous compositions. The 8xxx series alloys may contain appreciable amounts of tin, lithium, and/or iron.
- 9xxx: Reserved for future use
Applications of Aluminium Alloy sheet
For more specific applications, we have put together a table that will easily let you decide on what Aluminum grade to use for your project.
[b]End Use[/b]
[b]Potential aluminum alloy sheet Grades[/b]
[b]Aircraft (Structure/Tube)[/b]
2014
2024
5052
6061
7075
[b]Architectural[/b]
3003
6061
6063
[b]Automotive Parts[/b]
2014
2024
[b]Building Products[/b]
6061
6063
[b]Boat Building[/b]
5052
6061
[b]Chemical Equipment[/b]
1100
6061
[b]Cooking Utensils[/b]
3003
5052
[b]Drawn and Spun parts[/b]
1100
3003
[b]Electrical[/b]
6061
6063
[b]Fasteners & Fittings[/b]
2024
6061
[b]General Fabrication[/b]
1100
3003
5052
6061
[b]Machined Parts[/b]
2011
2014
[b]Marine Applications[/b]
5052
6061
6063
[b]Piping[/b]
6061
6063
[b]Pressure Vessels[/b]
3003
5052
[b]Recreation Equipment[/b]
6061
6063
[b]Screw Machine Products[/b]
2011
2024
[b]Sheet Metal Work[/b]
1100
3003
5052
6061
[b]Storage Tanks[/b]
3003
6061
6063
[b]Structural Applications[/b]
2024
6061
7075
[b]Trucks Frames & Trailers[/b]
2024
5052
6061
6063
Aluminum Alloy sheet & coil PUBLISHED DIMENSIONAL TOLERANCES
Specified Thickness
Thickness
Tolerance for widths
(Inches)
up to 39.37˝
Over
Thru
Inches plus and minus
0.0059
0.016
0.0010
0.016
0.025
0.0015
0.025
0.039
0.0020
0.039
0.047
0.0025
0.047
0.063
0.0030
0.063
0.098
0.0035
0.098
0.126
0.0045
0.126
0.158
0.0055
0.158
0.197
0.0070
The above are the published thickness tolerances in ANSI-H35.2 for all aluminum sheet alloys not included in the Aerospace aluminum alloy sheetTable or specified for aerospace applications.
Thickness Tolerances for Aerospace Aluminum Alloy sheets
Specified Thickness
Thickness
Tolerance for widths
(Inches)
up to 39.37˝
Over
Thru
Inches plus and minus
0.0059
0.010
0.0010
0.010
0.039
0.0015
0.039
0.079
0.0020
0.079
0.098
0.0025
0.098
0.126
0.0035
0.126
0.158
0.0040
0.158
0.197
0.0055
Common aluminum alloy sheet material
1050,1060,1100,3003,3050,5050,5052,5083,5086,6061,6082,7075,8011
Aluminium alloy 1050 is a popular grade of aluminium for general sheet metal work where moderate strength is required.Alloy 1050 is known for its excellent corrosion resistance, high ductility and highly reflective finish.
1060 aluminum alloy is another representative product in 1000 series aluminum alloys. 1060 aluminum alloy is formed by pure aluminum added by a small amount of copper element, which has excellent forming processing characteristics, high corrosion resistance, good weld ability and conductivity
Pure aluminum (.99% min.) is highly resistant to attack by chemicals and rural, industrial and marine atmospheres. Easily worked and ductile enough for deep draws. For general use in applications where the essential qualities of aluminum will be beneficial
These are high-strength, heat-treatable alloys with nearly twice the strength of 5052 and fair corrosion resistance. Alclad 2024 provides improved corrosion resistance.
Pure aluminum (.99% min.) is highly resistant to attack by chemicals and rural, industrial and marine atmospheres. Easily worked and ductile enough for deep draws. For general use in applications where the essential qualities of aluminum will be beneficial
Very similar to 3003 in physical properties and corrosion resistance though slightly lighter. Recommended for anodized applications for best match with extruded aluminum components.
A versatile alloy for applications requiring greater strength. Readily formed, very good corrosion resistance. Recommended for applications requiring high strength and formability
aluminum alloy sheet 5083 contains 5.2% magnesium, 0.1% manganese and 0.1% chromium. In the tempered condition, it is strong, and retains good formability due to excellent ductility. 5083 has high resistance to corrosion, and is used in marine applications. It has the low density and excellent thermal conductivity common to all aluminium alloys.
Recommended for welded assemblies requiring both welding efficiency and high joint strength. Good corrosion resistance. Typical applications include pressure vessels, marine super-structures and transportation equipment.
This high-strength, heat-treatable alloy provides good formability and weldability and good corrosion resistance. Suitable for a wide variety of structural and architectural applications.
Commonly known as an architectural alloy. It has reasonably high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. Most often found in various interior and exterior architectural applications and trim. It is very well suited for anodizing applications. The Tube and Angle shapes in this grade typically have square corners.
This alloy is intended for aircraft applications requiring the highest strength. Alclad 7075 provides improved corrosion resistance.
Haomei Aluminum alloy sheet plate
Aluminium alloy Sheets Plates offered by us are widely appreciated for having high abrasion resistance and longer service life. it Mobility,Sustainability,Economy and Lower weight, We offer this range in various options including Aluminium Sheet Plates, Aluminium Plates, Aluminium Chequered Plates and Aluminium Alloy Sheet Plates. These products are manufactured using superior quality aluminium. Moreover, before final delivery of these products, our quality assurance unit check these on the basis of some well defined parameters to assure a faultless range of products to our customers.