• Options
• Login
• Register
• Desktop Style
• Accelerated Mobile Pages Theme

Factors Affecting the Quality of Aluminum Coil

• Index

  • ask aluminium Forum
  • My Category
  • Knowledge & Technique
  • Factors Affecting the Quality of Aluminum Coil
• Factors Affecting the Quality of Aluminum Coil

• Factors Affecting the Quality of Aluminum Coil

  ZellaHyday > 07-09-2018, 07:44 AM

  1. alloying elements
  6063 aluminum alloy coil  is aluminum and magnesium as the main element of the preparation of the alloy, each element has a certain range of content, magnesium prices are high.Other manufacturers in order to reduce costs, the amount of magnesium to the minimum allowable content. Some of the worse, the content of magnesium below the minimum allowable content. There are plants in the alloy plus waste wire and waste basin waste aluminum pot, the basic talk about 6063 alloy. Resulting in aluminum mechanical strength is very low, can be low to use both hands bent is easy to bend, commonly known as noodles as soft. This is why aluminum can be a few thousand dollars cheaper one reason.
  
   
  2. Aluminum alloy melting furnace
  With the 6063 alloy how to melt, what stove, which is also essential, and now the domestic use of the stove has 40 years level, there are 90 level, the worst manufacturers with the original crucible boiler. There are burning, burning, burning and electric heating smelting furnaces. Some stoves have chimneys, some stoves without chimneys. Generally used for the square furnace (rectangular furnace), advanced for the round furnace, and some round furnace can be tilted pour aluminum water. On tonnage there are tons, two tons, five tons, ten tons, twenty-five tons and fifty tons of molten aluminum furnace. More advanced, in the melting furnace below the addition of a static furnace, standing furnace important preparation 6063 alloy, can be in this furnace in addition to slag removal, standing, and then cast aluminum rods, aluminum ceiling for extrusion use. In the original coal burning furnace and modern round furnace prepared alloy quality, absolutely not the same. General furnace, regardless of what fuel burns, should have a chimney, the fuel in the combustion process to produce most of the waste residue can be discharged from the chimney. Such as no smoke tube exhaust waste all melting aluminum water, so cast for extrusion with aluminum rods, the existence of a serious internal slag bubbles, which is one of the reasons for the poor quality of aluminum, aluminum is one of the reasons for cheap. Color coated aluminum roll
   
   
  I believe we read the above explanation must affect the aluminum rolled aluminum several elements have a certain understanding. I hope you will choose aluminum when the future will take these factors into account.
• Next Oldest Next Newest