Equipment use of industrial furnaces
wyd1014 > 07-26-2022, 05:44 AM
[font=宋体]
Industrial furnaces often involve heating processes such as smelting, drying, baking, and chemical reactions in their production processes. The industrial furnace is the heating equipment used for these processes. The fuels that provide heat sources for these devices mainly include gaseous fuels, liquid fuels, solid fuels and electricity. The use of these heating equipment is prone to burns and electric shock accidents. If gas or liquid fuel is used, it may also constitute a fire and explosion hazard in the event of leakage or spillage.Gear Vacuum Heat Treatment Process[/font]
[font=宋体]
When the industrial furnace is used, the furnace door lifting mechanism must be in good condition, and the broken wire of the wire rope must not exceed the specified value. The heavy hammer is properly configured, and the exposed transmission part should be provided with a protective cover. If it is a water-cooled furnace door, it is necessary to ensure that the pipeline is unblocked, and the pipeline is not frozen in winter. The furnace door should have a limit device. When entering and leaving the furnace, there should be an interlock device to cut off the power supply. The number of broken wires in the wire rope should not exceed 10% within the pitch. The weight suspension of the balance furnace door should be reliable. It is required that the protective device of the exposed transmission part should maintain the correct installation position and the structure is reasonable. The wire rope pulley of the furnace car should be intact. All pulleys and sprockets on the kiln are well-structured, free of defects, and rotate flexibly.High corrosion resistance aluminum alloy brazing sheet and its vacuum heat treatment process news[/font]
[font=宋体]
When entering and leaving the furnace, there should be an interlock device to cut off the power supply. The number of broken wires in the wire rope should not exceed 10% within the pitch. The weight suspension of the balance furnace door should be reliable. It is required that the protective device of the exposed transmission part should maintain the correct installation position and the structure is reasonable. The wire rope pulley of the furnace car should be intact. All pulleys and sprockets on the kiln are well-structured, free of defects, and rotate flexibly.Vacuum Heat Treatment of Cast Steel Valve Seats[/font]