RE: Aluminum Slug 1070
Keganhirl > 12-21-2021, 02:40 AM
1070 Aluminium Slug
1. Application
The 1070 Aluminium Slug can be used for manufacturing flexible tube,aerosol can/box,collapsible tube,aluminum bottle, aluminum cover etc, is widely used in cosmetics packaging, electronics, medical, food and automotive industries,etc.
(hereinafter abbreviated as “Slug”).
2. Applicable Dimensions
Theapplicable dimension of Slug shall conform to table 1.
Table 1
Unit : mm
Thickness 0.8 to 25
Diameter 3 to 220
3. Outline of the quality
3.1 The chemical composition of Slug shall conform to table 2.
Table 2
Unit : weight %
Si Fe Cu Mn Mg Cr Zn Ti Others Al
Individual Total
max.
0.20 max.
0.25 max.
0.04 max.
0.03 max.
- - max.
0.04 max.
0.03 max.
0.03 - min.
99.7
3.2 Mechanical properties (Hardness) shall conform to Table 3.
Table 3
Alloy Brinell Hardness(HB)
Collapsible/FlexibleTube 16~21
1070
Hard Tube 16~23
3.3 Dimensions shall conform to Table 4 which indicates dimensional tolerances.
Table 4
Unit : mm
Thickness Tolerance in thickness Tolerance in diameter
Guaranteed value - 3 to 20 Over 20
to 60 Over 60
to 220
Over 0.8 to 3.5 +0.05~-0.05
Over 3.5 to 6.5 +0.05~-0.03
Over 6.5 to 8.5 +0.05~-0.05 +0.05, -0.03 ±0.05 +0.07, -0.05
Over 8.5 to 17 +0.08~-0.05
Over 17 to 25 +0.08~-0.05
3.4 Center Bore and Concentricity Deviation in Porose Aluminium Slug shall conform to Table5.
Shapes Center BoreDeviation Concentricity Deviation
FlatSlug +0.01~-0.02
0.03
Concave Slug +0.01~-0.03
a=2e
4. Shapes mainly include of two types:4-1:Flat Shape 4-2:Concave Shape ,4-3:Other types,shall confirm to drawings as below:
4-1:Flat Shape
4-2.A:Concave Shape
4-2.B:Concave Shape
4-3:Other types-1:
Other types-2:
4-4:Oval, rectangular, square, heart etc shapes according to customer’s drawing/design.
5. Finishing include of three types:5-1:Mill finish,5-2:Shot Blasting,5-3: Tumbled, shall confirm to pictures as below:
5-1:Mill finish
5-2: Shot Blasting
5-3: Tumbled,
6 Packing -Export standard,Cardboard box,Wooden pallet.
1)The Aluminium Slug shall be packed in cardboard box of 25kg,and cardboard box will be placed and stacked on wooden pallets,then,will be covered by plastic film,finally,covered by plastic films and reinforced by plastic belt.
2)Packed according to customer’s requirement.
7. Marking
The following matters shall be marked by a suitable method at easy-to-see places of each package.
7-1 .1)Type and grade 2)Dimension 3)Manufacturer’s name 4)Gross Wt 5) Net Wt.
7-2. Markingaccording to customer’s requirement.