https://www.askaluminium.com/ Mon, 20 Apr 2026 10:41:59 +0000 MyBB https://www.askaluminium.com/Thread-ALUMINIUM-INGOT-A7 Thu, 29 Jan 2026 03:17:09 +0000 toyota1515]]> https://www.askaluminium.com/Thread-ALUMINIUM-INGOT-A7 available for sale
PURITY : 99.97% minimum
QUANTITY: 5000MT Monthly
ORIGIN  :EAST AFRICA
PRICE : $2000/MT CIF
LOADING PORT : Mombasa Port  Kenya
Whatsapp +254106303072]]> available for sale
PURITY : 99.97% minimum
QUANTITY: 5000MT Monthly
ORIGIN  :EAST AFRICA
PRICE : $2000/MT CIF
LOADING PORT : Mombasa Port  Kenya
Whatsapp +254106303072]]> https://www.askaluminium.com/Thread-High-Quality-Aluminum-Coils-Sheets-%E2%80%93-Direct-from-Factory Tue, 27 Jan 2026 01:10:31 +0000 askaluadmin]]> https://www.askaluminium.com/Thread-High-Quality-Aluminum-Coils-Sheets-%E2%80%93-Direct-from-Factory  High-Quality Aluminum Coils & Sheets – Direct from Factory! ?Petrofast Middle East FZC
Looking for premium aluminum coils and sheets for your construction or industrial projects?
We provide top-grade aluminum products with excellent performance, durability, and precision. ?️
? Why Choose Our Aluminum Products:
✅ High strength and lightweight
✅ Excellent corrosion and weather resistance
✅ Smooth surface & perfect flatness
✅ Easy to cut, bend, and form
✅ Available in various alloys, thicknesses, and surface finishes
? Applications:
Roofing | Cladding | Decoration | Transportation | Machinery | Packaging | Appliances
? Our Advantages:
Direct factory supply – stable quality and fast delivery
Competitive prices for bulk orders
Professional export service to over 60 countries ?
Custom sizes, coatings, and colors available
? Contact us on WhatsApp: 00971505968184
? Get your best quotation today – fast reply & reliable service guaranteed!
⚡ Strong, beautiful, and built to last — choose our aluminum coils and sheets for your next project! ⚡]]>  High-Quality Aluminum Coils & Sheets – Direct from Factory! ?Petrofast Middle East FZC
Looking for premium aluminum coils and sheets for your construction or industrial projects?
We provide top-grade aluminum products with excellent performance, durability, and precision. ?️
? Why Choose Our Aluminum Products:
✅ High strength and lightweight
✅ Excellent corrosion and weather resistance
✅ Smooth surface & perfect flatness
✅ Easy to cut, bend, and form
✅ Available in various alloys, thicknesses, and surface finishes
? Applications:
Roofing | Cladding | Decoration | Transportation | Machinery | Packaging | Appliances
? Our Advantages:
Direct factory supply – stable quality and fast delivery
Competitive prices for bulk orders
Professional export service to over 60 countries ?
Custom sizes, coatings, and colors available
? Contact us on WhatsApp: 00971505968184
? Get your best quotation today – fast reply & reliable service guaranteed!
⚡ Strong, beautiful, and built to last — choose our aluminum coils and sheets for your next project! ⚡]]> https://www.askaluminium.com/Thread-Mingtai-Aluminum-%C2%B7-In-Stock-Now Thu, 04 Dec 2025 02:10:57 +0000 mtaluminum]]> https://www.askaluminium.com/Thread-Mingtai-Aluminum-%C2%B7-In-Stock-Now Mingtai Aluminum · In Stock Now! ?

Fresh stock update for 5083 marine-grade aluminum plates (H111 temper), available for immediate delivery!

? Key available specs:

Thickness: 5/10/12/15/20/25/30/40mm

Width: 2000mm | Length: 6000/8000mm

Multiple quantities in stock – bulk inquiries welcome!

✨ Excellent corrosion resistance & high strength, ideal for shipbuilding and marine engineering

✅ Ready to ship · Certified quality · Full technical support

Need a reliable supply? Contact us today! Custom cutting services also available.

? Reach out now for quotes & details!

WhatsApp: wa.me/+8617760728273

sales@mingtai-al.com

[size=1]#MingtaiAluminum #5083AluminumPlate #MarineAluminum #InStock #MetalSupplie[/size]]]> Mingtai Aluminum · In Stock Now! ?

Fresh stock update for 5083 marine-grade aluminum plates (H111 temper), available for immediate delivery!

? Key available specs:

Thickness: 5/10/12/15/20/25/30/40mm

Width: 2000mm | Length: 6000/8000mm

Multiple quantities in stock – bulk inquiries welcome!

✨ Excellent corrosion resistance & high strength, ideal for shipbuilding and marine engineering

✅ Ready to ship · Certified quality · Full technical support

Need a reliable supply? Contact us today! Custom cutting services also available.

? Reach out now for quotes & details!

WhatsApp: wa.me/+8617760728273

sales@mingtai-al.com

[size=1]#MingtaiAluminum #5083AluminumPlate #MarineAluminum #InStock #MetalSupplie[/size]]]> https://www.askaluminium.com/Thread-Sell-Aluminum-6063 Fri, 12 Sep 2025 08:00:14 +0000 askaluadmin]]> https://www.askaluminium.com/Thread-Sell-Aluminum-6063 3000mt
Whatsapp : +82 1055458216]]> 3000mt
Whatsapp : +82 1055458216]]> https://www.askaluminium.com/Thread-ALUMINIUM-ALLOY-5083-H116-SHEET Mon, 21 Jul 2025 08:53:55 +0000 askaluadmin]]> https://www.askaluminium.com/Thread-ALUMINIUM-ALLOY-5083-H116-SHEET ALUMINIUM ALLOY 5083 H116 SHEET
4MM X 2000 X 6000
5MM X 2000 X 6000
6MM X 2000 X 6000
8MM X 2000 X 6000
10MM X 2000 X 6000
12 MM X 2000 X 6000
16MM X 2000 X 6000
20 MM X 2000 6000

READY STOCK
MOB : +86 13598417520
EMAIL. :wade@haomeicn.com]]> ALUMINIUM ALLOY 5083 H116 SHEET
4MM X 2000 X 6000
5MM X 2000 X 6000
6MM X 2000 X 6000
8MM X 2000 X 6000
10MM X 2000 X 6000
12 MM X 2000 X 6000
16MM X 2000 X 6000
20 MM X 2000 6000

READY STOCK
MOB : +86 13598417520
EMAIL. :wade@haomeicn.com]]> https://www.askaluminium.com/Thread-high-quality-metals-and-alloys Mon, 21 Jul 2025 08:38:52 +0000 askaluadmin]]> https://www.askaluminium.com/Thread-high-quality-metals-and-alloys Dear Sir/Madam,

Greetings!

We are engaged in the export of high-quality metals and alloys, including:

? Steel, Aluminium, Titanium, Copper, Tungsten, and Nickel Alloys
? Product forms: Sheet, Plate, Coil, Rod, Bar, Pipe, Tube, Foil, Fittings, Flanges, GI Coil, HRC, CRC

Our products are sourced from India, Korea, Vietnam, and China, ensuring both quality and competitive pricing.

Please feel free to contact us for any requirements or inquiries. We would be happy to support your business with timely delivery and quality assurance.

Looking forward to your valuable response.

Best regards,
Arvind Pandey
Hipre Aluminum Industries Tianjin Co. Ltd.
WhatsApp: +91-8169086195
Email: arvind.pandey@hiprealuminium.com
Alternate Email: laxmiint2020@gmail.com]]> Dear Sir/Madam,

Greetings!

We are engaged in the export of high-quality metals and alloys, including:

? Steel, Aluminium, Titanium, Copper, Tungsten, and Nickel Alloys
? Product forms: Sheet, Plate, Coil, Rod, Bar, Pipe, Tube, Foil, Fittings, Flanges, GI Coil, HRC, CRC

Our products are sourced from India, Korea, Vietnam, and China, ensuring both quality and competitive pricing.

Please feel free to contact us for any requirements or inquiries. We would be happy to support your business with timely delivery and quality assurance.

Looking forward to your valuable response.

Best regards,
Arvind Pandey
Hipre Aluminum Industries Tianjin Co. Ltd.
WhatsApp: +91-8169086195
Email: arvind.pandey@hiprealuminium.com
Alternate Email: laxmiint2020@gmail.com]]> https://www.askaluminium.com/Thread-about-Used-1530mm-1100mm-1000mm-Aluminum-Rolling-Mill-Plant Wed, 04 Jun 2025 08:43:24 +0000 askaluadmin]]> https://www.askaluminium.com/Thread-about-Used-1530mm-1100mm-1000mm-Aluminum-Rolling-Mill-Plant
I am Baek of BMJ KOREA.

Let me send you information about Used 1530mm/ 1100mm / 1000mm Aluminum Rolling Mill Plant for Sale in Korea.

If you have an interest, I will send details.

Thank you.



Used Aluminum Rolling Mill Plant

❶ Melting furnace x 2

❷ Casting machine x 2

❸ 1530mm Hot rolling mill x 4

❹ 1000mm Cold rolling mill

❺ 1100mm Cold rolling mill

❻ Annealing furnaces / Slitters



(1) Aluminum Melting Furnaces & Casting Machines

Manufacturer: CH WIN TECH

Manufacturing year: 2014

Furnaces:15ton/hour and 10ton /hour

Fuel: Oil

Material: Ingot, Scrap

Casting machine x 2 sets

Strip width: 1010mm

Strip thickness: 5-7mm

Line speed:: 2m/min

Coil weight: 7ton



(2) 1530mm Aluminum Hot Rolling Mill Line

Manufacturer: Jeil(Korean)

Manufacturing year: 2019

Capacity: 20ton/h

Thickness: 6~7mm

1)      1st Hot Mill

Cap':20MT/Hr

2-HI TYPE

Ø700*1,650(L)mm*2ea

Width:760∼1,530mm

Speed: 62m/min

Rolling capacity: A1050-50mm,A3003-35mm,A5052-28mm

Motor:750V*1,000kW*2ea

Slab thickness:40∼550mm

2)      2nd Hot Mill

Cap':3.4T/Hr

2-HI TYPE

Ø600*1,650(L)mm*2ea

Width::760∼1,530mm

Speed:60m/min

Rolling capacity:14mm(at 1530mm)

Motor : 750V*650kW

3)      3rd Hot Mill

Cap':3T/Hr

2-HI TYPE

Ø508*1,650(L)mm*2ea

Width:760∼1,530mm

Speed:85m/min

Rolling capacity: 9mm(at 1530mm)

Motor: 750V*650kW

4)      4th Hot Mill

Cap':1.9T/Hr

2-HI TYPE

Ø508*1,650(L)mm*2ea

Width:760∼1,530mm

Speed:115m/min

Rolling capacity :4mm (at 1530mm)

Motor: 750V*650kW



(3) 1000mm Aluminum Cold Rolling Mill Line

Manufacturer: Intergrated Industrial System (U.S.A)

Manufacturing year: 2013

4-Hi type

Reversible type

Coil inner dia.: Φ510mm

Coil outer dia.: 1,750mm

Coil weight: max 7ton

Rolling speed: 0~400m/min

Motor: DC500KW

Max.thickness:7.5mm

Drive type: work roll drive

Work Roll: Φ290×1,150mm

Back UP Roll: Φ813×1,524mm

Motor: DC500kW

Oil Pump System

Roll Change Device



(4)1100mm Aluminum Cold Rolling Mill Line

4-Hi

Capacity: 4ton/hour

Speed:Max.2,000m/min

Coil inner diameter :Ф500mm

Coil outer diameter:Ф1,800mm

Thickness:0.2∼6mm

Width:750∼1,100mm

DC Motor 700V 900KW

1530mm Aluminum Hot Rolling Mill Line

Manufacturer: Jeil(Korean)

Manufacturing year: 1919

Capacity: 20ton/h

Thickness: 6~7mm

--------------------------------------------------------------

BMJ KOREA CO.,LTD

President: Jongsung Baek

Mobile: +82-10-3108-1237

Fax: +82-51-719-9678

E-mail: paekjs1961@gmail.com

Address: 27-8, Gukjegeumyung-ro 8-gil, Yeongdungpogu, Seoul, Korea]]>
I am Baek of BMJ KOREA.

Let me send you information about Used 1530mm/ 1100mm / 1000mm Aluminum Rolling Mill Plant for Sale in Korea.

If you have an interest, I will send details.

Thank you.



Used Aluminum Rolling Mill Plant

❶ Melting furnace x 2

❷ Casting machine x 2

❸ 1530mm Hot rolling mill x 4

❹ 1000mm Cold rolling mill

❺ 1100mm Cold rolling mill

❻ Annealing furnaces / Slitters



(1) Aluminum Melting Furnaces & Casting Machines

Manufacturer: CH WIN TECH

Manufacturing year: 2014

Furnaces:15ton/hour and 10ton /hour

Fuel: Oil

Material: Ingot, Scrap

Casting machine x 2 sets

Strip width: 1010mm

Strip thickness: 5-7mm

Line speed:: 2m/min

Coil weight: 7ton



(2) 1530mm Aluminum Hot Rolling Mill Line

Manufacturer: Jeil(Korean)

Manufacturing year: 2019

Capacity: 20ton/h

Thickness: 6~7mm

1)      1st Hot Mill

Cap':20MT/Hr

2-HI TYPE

Ø700*1,650(L)mm*2ea

Width:760∼1,530mm

Speed: 62m/min

Rolling capacity: A1050-50mm,A3003-35mm,A5052-28mm

Motor:750V*1,000kW*2ea

Slab thickness:40∼550mm

2)      2nd Hot Mill

Cap':3.4T/Hr

2-HI TYPE

Ø600*1,650(L)mm*2ea

Width::760∼1,530mm

Speed:60m/min

Rolling capacity:14mm(at 1530mm)

Motor : 750V*650kW

3)      3rd Hot Mill

Cap':3T/Hr

2-HI TYPE

Ø508*1,650(L)mm*2ea

Width:760∼1,530mm

Speed:85m/min

Rolling capacity: 9mm(at 1530mm)

Motor: 750V*650kW

4)      4th Hot Mill

Cap':1.9T/Hr

2-HI TYPE

Ø508*1,650(L)mm*2ea

Width:760∼1,530mm

Speed:115m/min

Rolling capacity :4mm (at 1530mm)

Motor: 750V*650kW



(3) 1000mm Aluminum Cold Rolling Mill Line

Manufacturer: Intergrated Industrial System (U.S.A)

Manufacturing year: 2013

4-Hi type

Reversible type

Coil inner dia.: Φ510mm

Coil outer dia.: 1,750mm

Coil weight: max 7ton

Rolling speed: 0~400m/min

Motor: DC500KW

Max.thickness:7.5mm

Drive type: work roll drive

Work Roll: Φ290×1,150mm

Back UP Roll: Φ813×1,524mm

Motor: DC500kW

Oil Pump System

Roll Change Device



(4)1100mm Aluminum Cold Rolling Mill Line

4-Hi

Capacity: 4ton/hour

Speed:Max.2,000m/min

Coil inner diameter :Ф500mm

Coil outer diameter:Ф1,800mm

Thickness:0.2∼6mm

Width:750∼1,100mm

DC Motor 700V 900KW

1530mm Aluminum Hot Rolling Mill Line

Manufacturer: Jeil(Korean)

Manufacturing year: 1919

Capacity: 20ton/h

Thickness: 6~7mm

--------------------------------------------------------------

BMJ KOREA CO.,LTD

President: Jongsung Baek

Mobile: +82-10-3108-1237

Fax: +82-51-719-9678

E-mail: paekjs1961@gmail.com

Address: 27-8, Gukjegeumyung-ro 8-gil, Yeongdungpogu, Seoul, Korea]]> https://www.askaluminium.com/Thread-Embossed-Chocolate-Foil Thu, 13 Feb 2025 06:09:13 +0000 hmwadeseo]]> https://www.askaluminium.com/Thread-Embossed-Chocolate-Foil Are you looking to elevate your packaging game? Embossed chocolate foil offers a unique blend of elegance and functionality, making it an ideal choice for various applications:
✨ Enhanced Aesthetics: The textured surface of embossed foil catches the light, creating a stunning visual appeal that makes your products stand out on the shelf.
? Durability: Not only does it look great, but embossed foil is also robust and resistant to tearing, ensuring that your packaging maintains its integrity.
? Email me: wade@haomeicn.com
? Whatsapp me: http://wa.me/8613598417520]]> Are you looking to elevate your packaging game? Embossed chocolate foil offers a unique blend of elegance and functionality, making it an ideal choice for various applications:
✨ Enhanced Aesthetics: The textured surface of embossed foil catches the light, creating a stunning visual appeal that makes your products stand out on the shelf.
? Durability: Not only does it look great, but embossed foil is also robust and resistant to tearing, ensuring that your packaging maintains its integrity.
? Email me: wade@haomeicn.com
? Whatsapp me: http://wa.me/8613598417520]]> https://www.askaluminium.com/Thread-3104-H19-Aluminum-Sheet-for-Food-Can-Lids Thu, 13 Feb 2025 00:56:59 +0000 askaluadmin]]> https://www.askaluminium.com/Thread-3104-H19-Aluminum-Sheet-for-Food-Can-Lids
3104 - H19 Aluminum Sheet for Food Can Lids

Material State: H19
Thickness: 0.1 - 500mm
Width: 100 - 2650mm

The 3104 - H19 aluminum sheet for food can lids boasts excellent properties:

High cleanliness: It is clean and hygienic, facilitating storage.
Good anti - rust performance: It has good rust - resistance, excellent ductility, and is lightweight.
Superior sealing property: It can effectively isolate air, significantly extending the product's shelf - life.
Defect - free surface and flat shape: The surface of the 3104 - H19 aluminum sheet for food can lids has no defects, and its flat shape makes it easy to process.
Energy - saving and environmentally friendly: The 3104 aluminum sheet features a low density, high strength, easy formability, and a high recyclability rate, contributing to energy conservation and environmental protection.

Direct - selling Manufacturers of 3104 - H19 Aluminum Sheet for Food Can Lids

As a large - scale aluminum sheet supplier, Haomei Aluminum has continuously carried out research and development and improved its technology over the years. The 3104 aluminum sheet for easy - open cans produced by the company has excellent performance. Through customer testing, the 3104 - H19 aluminum sheet for food can lids we produce meets users' requirements, has stable performance, good corrosion resistance, is lightweight, heat - resistant, has good conductivity, is odorless, non - toxic, and has a good printing effect.]]>
3104 - H19 Aluminum Sheet for Food Can Lids

Material State: H19
Thickness: 0.1 - 500mm
Width: 100 - 2650mm

The 3104 - H19 aluminum sheet for food can lids boasts excellent properties:

High cleanliness: It is clean and hygienic, facilitating storage.
Good anti - rust performance: It has good rust - resistance, excellent ductility, and is lightweight.
Superior sealing property: It can effectively isolate air, significantly extending the product's shelf - life.
Defect - free surface and flat shape: The surface of the 3104 - H19 aluminum sheet for food can lids has no defects, and its flat shape makes it easy to process.
Energy - saving and environmentally friendly: The 3104 aluminum sheet features a low density, high strength, easy formability, and a high recyclability rate, contributing to energy conservation and environmental protection.

Direct - selling Manufacturers of 3104 - H19 Aluminum Sheet for Food Can Lids

As a large - scale aluminum sheet supplier, Haomei Aluminum has continuously carried out research and development and improved its technology over the years. The 3104 aluminum sheet for easy - open cans produced by the company has excellent performance. Through customer testing, the 3104 - H19 aluminum sheet for food can lids we produce meets users' requirements, has stable performance, good corrosion resistance, is lightweight, heat - resistant, has good conductivity, is odorless, non - toxic, and has a good printing effect.]]> https://www.askaluminium.com/Thread-OUTLAW-STOCKS Mon, 21 Oct 2024 06:30:58 +0000 hmwadeseo]]> https://www.askaluminium.com/Thread-OUTLAW-STOCKS Chassis: 1955-1996 USA Framed/Clip Cars listed.
Wheelbase: 107” Minimum, 121” Max. Measured Right side. Weight:  51% Rear Weight percentage maximum.
Engine: .515" Max Total Lift. All Casting Marks remain unchanged. No Solid Roller Lifters are allowed. Engines over 5.9 Liters require 500 CFM Carburetor.
Tires: Dirt Tires or Asphalt Pull-offs, 11” maximum widths.  Durometer 54 or harder after Feature.  Siping, Grooving, Shaving, Grinding ok. Steel Wheels: 15" X 7”-10” steel wheels. Rear outer Beadlocks ok. Racing Studs are required. Five 1” lug nuts are required per wheel. No Bleed-off Valves.
Engines: Strictly No Altering Castings or Bosses. Heads/Blocks/ Cams/Cranks must keep factory Markings, Bosses and #’s - If not present, Part is Illegal. No CNC Milling fake OEM numbers into Parts!
ENGINE & DRIVER LOCATION:
ENGINES: location= Balancer @ Lower Ball Joint or Forward.  Within 1” of Center. Steel Motor Mounts, Aluminum Mid-Plate ok. Oil pan may not hang below the crossmember. Driver seat: left of Driveline & Seat forward of rear Axle. Flywheel forward of Drivers Feet. Steel Safety cover plates over U-Joints & Driveshaft Tunnel. Front Skid Panel only on crossmember may be trimmed & filled for clearance. Fuel Pump Cut out allowed if boxed back in and welded solid & rounded corners.
Chassis Options: 1955-2002 American Passenger Cars (S-10's GMT 400/800-SN95/FOX ok)  All Cars must have OEM Stamped Steel Ford or GM or Mopar Front Lower Control arms.
OEM Leaf & OEM Coil rear Suspensions only.
GRAPHICS FOR NUMBER ON ROOF FACES STANDS Contrasting Numbers -Plain-Legible on doors 20" minimum Car Numbers.
METAL BODY: 1936 or newer, Muscle Car - Wedge Car, body styles. Must Protect Drivers. Maximum Body Width Tire Sidewall. Sealed Interior Metal Firewall and Floor & over top of Driveshaft minimum sized holes for throttle, etc. 14"+ minimum Drivers Side Cockpit Opening. Body Cannot Obstruct Other Competitors' View for Safety. Aftermarket Racing Plastic Quarters & Front Fenders ok. No part of the car allowed more than 48" forward of front Spindle or 48” rearward of Axle.
NOSE: Plastic Noses & Tail Panels Optional. Racer may fabricate Aluminum Wedge Nose W/ Two Plastic corners. Square & Level across the front only, no crooked front ends. Nose Maximum one inch wider than front Tread with wheels pointed straight & no narrower than front Rotors. OEM bumpers don’t require a Nose & can be top halved.
Fenders: Metal or Plastic Fenders ok, Fenders can remain open from Spindle to Mid-plate. Rear of Fender can tuck inside nose plastics.
HOOD: Metal Only. Must cover the top of the engine and radiator & seal at deck. Air Cleaner Hole ok. Scoops - Cannot Block Drivers View - No obstructions.
Deck: Metal Only. Deck begins within 12” rear of Flywheel. 41" Maximum Rear Deck height. Maximum Width Deck 66”. 6.6" Maximum Rake on Deck. Open top interiors optional. OEM Trunks optional.
Hood 3" Rake Max, Flat Decks Side to Side Front to Rear.
Doors & Quarters: No Fiberglass. 14" Minimum Driver Door Window Access & 12" Minimum Static Window Opening. Door Skins min 26" to max 34” Tall with 4” ground clearance. Quarter Panel Length 38" to 48" Maximum from Axle to Rear Body Line.
General Sheetmetal Rules: No Concave Body Panels to trap air. Footwell behind Flywheel. Extended Footwells require Steel Plate & Blow out Protection. Metal Drivers Interior must be sealed. Body Max Width outside Tread side to side, Flare 3" at front of Right Rear Tire ok. No narrower than Rotors or Frame. Right line front Frame to rear outer Tread + Flair ok. No Sharp Bumpers or Edges-Tire Cutters.
Spoiler: 8" Deck Spoiler Max Height, No Portion of Deck Spoiler may be over 47" Tall. Spoiler within Sideboards & uniform, Rear Spoilers Max Width 60”.  Optional "F40" Rear Wing Spoiler. No higher than Roof & 60" Maximum width. 8" Maximum depth.
Rear: Rear "Rock-Catcher" Aluminum Panel, 6"+ vertical measurement from Deck, angled up to 45* ok or Tail Plastics. Quarter Plastics allowed. (ABC, S2, SGN, Dominator, stock-style Okay). Tail light graphics okay.
Roof: Compact or Sub-Compact Fastback OEM Steel Roof, may fabricate OEM Metal Roof or "SPEEDWAY" #91054175 Styles. Approximate-Maximum 58" & 46” Minimum height & 3” Maximum Rake. Must bolt to Cage w/ Four Bolts. Steel rollover Protection panel affixed above Halo recommended if not Steel Roof.- 52" from frame Maximum height.
Sail Panel: Fastback, Coupe, Opera, Camaro or Open NOVA/Daytona. 3D ok, no air traps. "C" Pillar inboard of Quarter Panel 3" ok. Stock/Wedge Car appearance. Sail Panels remain Flat.
Shocks: No Bulbs or external chambers allowed. 4 Shocks per Car. Stock Mount Only: Bilstein/Doetsch-TECH/KYB/Koni Classic. Welded Heim Ends: PRO WB Steel, Doetsch-TECH, QA1 EC, "Carrera" & Pro "SS" Series okay. Four shocks per car using one per tire.
REAR AXLE Magnetic Rear end housing must be stock Steel Tubes only. May have three Hole Trailing Arm Mounts. Ford 9" Ok. Jeep, GM, Ford, Chrysler.(7.5", 7.625", DANA 44, 8.25",8.5", 8.8", etc) Strange & Moser Etc Okay. No Magnesium or Aluminum allowed. All Mounts Affixed, no sliding or rolling Mounts. Must Be LOCKED. Bracing optional. After-market axles, studs, and mini-spools are okay. Rear end axles must be locked together at all times, Spiders may rock. No 8 Lugs. Mandatory Left & Right DISC BRAKES & Caliper & Pads. No Floaters.
DRIVE SHAFT Must be painted white or silver or fluorescent orange. Must have steel drive shaft loop (360 degree) connected to the frame located within 6" rear of the front drive shaft u-joint. Minimum size is 2" X 1/8". Balance ok. NO CARBON FIBER! Steel Only.
Brakes MUST HAVE FRONT & REAR BRAKES, Remote Driver adjust allowed. Racing Master Cylinders With Aftermarket Pedal ok. Front OEM style rotors only, no oil bath hubs. No aluminum brake components allowed. OEM magnetic Calipers only. Mandatory Magnetic Rear Discs up to 12" disc brakes. Rear Rotors with Hats dual vane only. Solid Hats only. 5/8" studs are Required, passenger car Studs must be upgraded. Bolt pattern chevy or ford. Working hydraulic brakes front & Rear mandatory. No Drum Brakes, No aluminum brake parts. Maximum Two Brake Master Cylinders, Aftermarket Pedal Assembly ok, Wilwood, AFCO or Tilton Styles, may have Driver adjustable Front to Rear Manual Bias Control. OEM Style front Rotors only, Rear Rotors may be Floating OEM only. OEM Style Single Piston Magnetic Calipers only.
Ignition: HEI & OEM Electronic Distributors Only. HEI Rev Limiters MSD #83647 Circuit Board or similar ok. Vacuum advance may be removed and the pick-up coil locked. 6AL MSD Ignition Boxes or off brand maximum, 6000's MSD or "Daytona Smart" Box is allowed with OEM or parts house stock replacement Coils & Wires only. No Traction Control allowed.  No magnetos. Ignition Kill switch must be located within reach from outside the car.
Control Arms: Steel Tubular Front Upper ok, Steel Fabricated Mount ok. Front Lower stamped Arms Only. Steel Trailing Arms, tubed or boxed ok. No Softy Bushings in trailing arms, must be OEM type. Grease Zerks ok on all moving suspension parts.
Steering: Steel Gearbox in OEM Mounts, Quick Steer Ok, Steel Pump on Engine only. Steel Idler in OEM Mounts, Pass Side single adjuster outer Tie Rod okay, ANY OEM type Tie Rods that fit Spindles & Center Link, Quick Steer Okay, Steel Pump on Engine. Quick release steering wheel is mandatory. No chains or sprockets allowed in the steering system. Bump steer cannot be adjusted. QA1 Ball Joints ok. Only FOX/SN95 Complete front Clips are allowed OEM Rack & Pinion.
Coil Springs: Four Steel Coil Springs Maximum, 5"-15" Max Length 3"-5.5" O.D., No 5th Coils. Corrected Spring bucket ok, Jack Bolts & Adjustable Cups ok.
*Driver: Drivers Feet rear of Flywheel/Firewall, Driver Left of Driveshaft & Forward of 3rd Member. Minimum Steel door Plate Under Seat. Steel plate over Drivers door bars protects Driver seat minimum.
CHASSIS: Frame: 107+” Minimum Wheelbase. G-Body Specs ok. Full Frame & Clips May Modify- adapt factory Coil Spring Rear Clip. Coil Spring Bucket & Jack Bolts allowed front & rear. Plating Crush zones & body mounts ok. All Chassis must remain OEM Parallel & True & straight, No Wedge or Crooked Chopping. Camaro Clips to Rear Motor Mount preferred. No Round Tube Front Clips. No Aftermarket Rack & Pinions Allowed. Leaf Camaro may adapt OEM Coil Spring rear Clip. OEM Frame's may shorten to 108” wheelbase. Frames/Clips may be straight Rail heavy tubing on Passenger side from behind lower control arm Stanchion to rear Suspension Mount, eliminating perimeter right side frame rail.
FRONT SUSPENSION: Steel parts only. Front Upper Control Arm mounts must be welded. Must use uncut OEM Crossmember. OEM Stanchion holes may be corrected. Corrected spring buckets ok. Front Springs 4 ½” minimum diameter. Big Body may have notches for tubular upper control arms. Only SN95/FOX approved OEM Rack & Pinions.
Front Control Arms: Tubular Steel Upper Front Arms & Aftermarket steel Upper Mounts okay. Any Combo front offset okay. Must accept OEM style Ball Joint. Upper Control Arm Mount & Bolt Pattern may be changed. Nova & S-10 & G-Body Front Lower Optional. Stamped Steel Lower Control arms must be either Ford, Mopar or GM with OEM style Bushings, Grease zerks okay.
Spindles: USA OEM Disk type, Chevy, Mopar & Ford, car or light truck. OEM Style Hubs & Spindles only. SR Spindles= Speedway / ARGO /AFCO - Styles. Must be Cast or Forged Magnetic. No Wet Bath hubs. No Fabricated Tubular Spindles allowed. No Aluminum. Strut Spindles with upper ball joint adapter allowed. Hub with Kotter key & Castle Nut required on spindles. C-3 ok.
OEM REAR SUSPENSIONS ONLY: OEM GM or Ford 4 Link OEM COIL Spring Rear Frame Only. Leaf Clips may swap to OEM Rear Coil Clip with Axle mounted Centered. OEM COIL Suspensions: General Motors & Ford & Jeep only. 1982-2002 Camaro Torque ARM: Must Use OEM lower Trailing Arms. Optional 3rd Link with OEM Trailing Arm & Bushings. 3rd Link may be mounted Centered over Driveshaft or just right of Cast housing on Axle Tube or bolted to existing Torque Arm Mount. Panhard Bar minimum length is 19” and is mounted on the rear of the housing or axle tube. No Biscuit or Spring Rods allowed.
SPRINGS: Steel Coil Springs, 15" Max Height, 4.5"- 5.5” diameter. Two Coil Springs only, one per side allowed. Coil Spring perch solid on Housing. Upper Jack-bolts or adjustable Spring cups okay, Spring perch affixed Center Tube. No Coil-Overs or Eliminators & No floating Mounts.
Trailing Arms: OEM Style, may be Boxed w/ OEM Style Bushings. OEM Arms may be matched to Differential used. Speedway Motors | #91634055 No Softy Bushings. ALL Trailing Arms remain OEM equal lengths per side. Straps through rear Springs only. No Coilover Eliminators Allowed.
Leaf Springs: Camaro type. Steel Racing Brands ok. .LEAF SPRINGS Fabricated Rear Clip ok. Pivot Bushing/Trac-Rod/Toe Adjuster/Sliders-Shackle. Adjustable Suspension Mounts ok. Shackle/Dogbone/Sliders/Toe Adjuster ok. Calvert Style “Trac Rod” & J-Bar ok. Any bushing. Front Leaf Mount may have adjusting Holes & bolted Brackets. (Tube Subframe Clip to rear bumper for Leafs only. No Gutting Clips.) Moving hangers & inboard ok. Fabricated Leaf Spring over or underslung rear clip: 12 Gauge - Round 1 3/4" Tube or 2X2” Square Main Rail or Larger recommended: Fabricated Rear Clip ok (2x3”-095 or 2x2 110 or 1.5x120 etc).
ENGINE: 412” Maximum cubic inches. Block - OEM or GM19432110/BRO-RS400035842W, Ford & Mopar & GM OEM Blocks. (OEM Hydraulic Roller ok) Engines over 5.9 Liters require 500 CFM Carburetor.
Rockers - Steel only, Roller ok & up to two per shaft unless OEM.
Crankshaft: Aftermarket is limited to EAGLE-SCAT 9000 Cast Only. Internal or External Balance ok. No Billet or exotic Crankshafts allowed.
Rods - OEM/Powder/SCAT/EAGLE/LS. ARP Bolts & Cap Screw ok.
Pistons - Hypereutectic or Forged: SUMMIT-KB- TRW-SpeedPro-UEM-JEGS or OEM. 10.5-1 Maximum Total Compression. No Exotics.
Oil Pans: sight plug @ #. Wet Sumps only. Left Turn oval Pan ok,
OEM HEADS ONLY:  Iron Small Block Heads only Allowed Pocket Port & Bolt Tubes & Valve reliefs. Studs & Plates & Beehive ok. OEM Valve sizes only are maximum sizes. 3-5 Angle Valve job ok. Spring Pocket & Rocker clearance ok, Poly Locks ok. Stud Girdles & Vortec ok. No Titanium allowed. No Altering Casting numbers. Chamber Valve reliefs ok. OEM 5.9 Liter Engines Only Stock Replacement Heads = chamber valve reliefs only are allowed, otherwise race as is. Aluminum OEM heads are allowed 2.0" Maximum Intake & 1.6" Exhaust Valve sizes maximum. No Overhead Cam heads allowed.
Aftermarket Iron Heads: Race As Is. ALL Port & Runners Race As-is with Thick Decks only! No Porting or Polishing or Milling. Absolutely no Angle Milling. OEM Valve Angles only. Steel Rocker Arms: Roller Tip ok. - 1.6 Ratio Maximum. Spacers & Bushings ok, Magnetic. 2.02” Intake Valve X 1.6" Exhaust Valves 200cc maximum.
Intake Manifold: Single Carb, No 2 piece/exoticsH2O Lines Ok. Mid-Rise Maximum. Alloy or Iron/Steel.
CARBURETORS: Choke horn required with OEM Number. No HP or XP allowed. 2nd Safety Spring required. Clamp all Lines. Solid Top Metal Air Filter Housing. Air Filter must be present to compete.
FUEL PUMP Only stock mount pushrod activated OEM style allowed. No bypass fuel systems or regulators or Belt Driven. Unleaded only, Gasoline only.
EXHAUST: OEM Exhaust Manifolds, Dorman Re-Pops ok. Any Collector Welded or Threaded ok. No Exotics allowed. Extended Collectors & X pipe ok. All cars may require Mufflers if Track Mandates.
BATTERY: 12 volt battery only allowed, maximum two & may be charged by an alternator. 12 volt only. Securely Mounted, Sealed only or in Sealed case. No Push Start Cars. Cars must be self sufficient & self starting.
RADIATOR Brass/Copper or Aluminum. Radiator front of engine. Catch Cans Required. Transmission Cooler allowed inside Engine Radiator or Separate. Electric Fans ok.
OEM TRANSMISSION: Automatic or Standards only. OEM-Mitchell Machine ok. Dummy Converters okay. Self-starting with working neutral, reverse, and forward. All Cars must have Steel Front Drive Shaft Hoop. Steel Driveshaft only. Transmission fluid coolers ok. Safety shield 180 degrees over clutch assembly. Slave cylinders & hydraulic throw out bearing ok. Aftermarket Steel Bellhousings ok. Ultrabells ok. No Direct Drives allowed. Jericho/Borg Warner 3 & 4 Speeds allowed with 100 Pound Penalty. No Brinn or Bert or Falcon styles. No Aftermarket Two Speeds allowed.
ROLL CAGE: Eight Point minimum. Made in USA Steel only. Driver Seat must be forward of rear Cross-member & Left of Drivetrain & behind Engine. Main roll cage must consist of continuous hoops not less than 1-1/2" X .095", DOM recommended. Some Sanctions require 1 ⅝” or 1.75" Main Cage. All welds must be complete. A minimum three Driver (3) & two Passenger side Door bars. X-bracing is allowed. Driver Door plates mandatory 16" X 16" min. USA Mild steel Cages NO chrome-moly. Must have a front drive shaft hoop, no chains allowed unless welded solid. Ballast must be safely painted, marked and Securely Bolted down for Safety. 2 Seaters require Drivers safety items on both sides. Rail present drivers side & beyond the base of driver’s seat for Door Bars. Only USA Mild Steel Round tubing, No Chromoly. 1.5" 0.95 minimum & w/ vertical supports. Rear Down Bars & kickers weld on either side of the Fuel Cell. Minimum Eight Point Cage Chassis, 2" minimum Clearance from Drivers Helmet. Minimum Four ⅜”.Windshield Bars. Welded Tabs - Eye's 1/2" for Harness & Seat 3/8" Securely Mount with Bolts & Must pass Tech Safety Inspection. "X" Bracing allowed, Gussets & Cross Bracing required. Front Driveshaft Hoop Required. Engine Must Safely Mount in Chassis, Body Must Mount to Chassis in Secure Fashion. Cage must serve as protection for Driver and other competitors as a Priority.
WINDSHIELD BARS Minimum of three (4) windshield bars 3/8" in diameter is required. Front of driver. #3 Rebar OK. NERF BARS Single bar or “hooped” door Nerfs allowed. Maximum size = 1-1/2" X .095" x 2 or 1 ¾” single, attached to the cage at the front and rear sections of the nerf bar. No center supports, within tread. All bumpers and nerf bars must be capped and rounded. Hidden Behind Door Skin preferred.
DRAFTING BUMPERS 20” Nominal height. Flat Bar Must expose outside Nose minimum. Width Ball Joint to Center of Tire & may be stacked or hooped. 1.25-1.75" .095" max Round Tube or 2x2" square tube 13 Gauge maximum thickness. May Hide Behind Nose. No Plating reinforcement except for Mount. Required fuel cell protection bar (minimum size = 1-1/2" X .095"). Wrecker loop required. Must be exposed. Plastic or Aluminum nose behind/above bumper. Must absorb heavy Impacts so the driver doesn’t, Required front and rear. No Sharp Edges. May run 3" Flat strap or single Tube in front of Plastic Nose & Tail. Maximum width to Rotors. Minimum Wide as Frame & Wider than Fuel Cell. Must offer Wrecker Hoop. Metal OEM OK. Bumpers must be permanently attached so they don't fall off or break off.
G-Body's may require minimum weights to compete.
Power Performance all rights reserved. *Flying Body Panels and Bumpers is a Safety Hazard to Spectators & fellow Competitors & will be Black Flagged, Door skins required. Cars must pass Inspection from the Pit Steward before re-entering competition. Only approved personnel allowed in Hot Pits if used.
Fuel Cell 25 Gallon Maximum. Racing fuel Cell Required. Safety Steel Plate under Cell. One inch minimum tubing must be used frame to frame mounting cell. Must have Steel CAN & Small Cap w/flap & 2" Steel flat Straps Minimum. Located higher than 3rd Member. All Fuel Lines must be Clamped. NO Plastic Fuel Lines. 1 1/2” or larger Rear Fuel Cell Protection bar required.
BALLAST WEIGHT: Must be securely bolted and painted white w/ car number. Two ½” grade 8 bolts per 30-50 pounds of weight. Bare Iron Heads may be used as Ballast. No Ballast bolted on rear end housing allowed.
Race Car - High Performance Appearance Mandatory. No lights or speakers. No Glass Allowed.
Track may use Pace Car. No Rabbit Starts. Stock Cars always start side by side double stacked front to back. Green @ Cone/White line By Flag Man. Leader Starts the race & flagman throws Green Flag if it’s a fair start. All Restarts should be Double File, with Leader choosing inside or outside Lane and 2nd place car alongside. Single file restarts used only as a last resort to finish a race over time limit. Power Performance - All Rights Reserved.. Any Track may use these Rules. All Risk Lies with the Track, its competitors, personnel, & Fans, It’s up to the Track to enforce Safety & Provide Insurance for everyone involved. Racing is Dangerous. Proceed at your own risk.]]> Chassis: 1955-1996 USA Framed/Clip Cars listed.
Wheelbase: 107” Minimum, 121” Max. Measured Right side. Weight:  51% Rear Weight percentage maximum.
Engine: .515" Max Total Lift. All Casting Marks remain unchanged. No Solid Roller Lifters are allowed. Engines over 5.9 Liters require 500 CFM Carburetor.
Tires: Dirt Tires or Asphalt Pull-offs, 11” maximum widths.  Durometer 54 or harder after Feature.  Siping, Grooving, Shaving, Grinding ok. Steel Wheels: 15" X 7”-10” steel wheels. Rear outer Beadlocks ok. Racing Studs are required. Five 1” lug nuts are required per wheel. No Bleed-off Valves.
Engines: Strictly No Altering Castings or Bosses. Heads/Blocks/ Cams/Cranks must keep factory Markings, Bosses and #’s - If not present, Part is Illegal. No CNC Milling fake OEM numbers into Parts!
ENGINE & DRIVER LOCATION:
ENGINES: location= Balancer @ Lower Ball Joint or Forward.  Within 1” of Center. Steel Motor Mounts, Aluminum Mid-Plate ok. Oil pan may not hang below the crossmember. Driver seat: left of Driveline & Seat forward of rear Axle. Flywheel forward of Drivers Feet. Steel Safety cover plates over U-Joints & Driveshaft Tunnel. Front Skid Panel only on crossmember may be trimmed & filled for clearance. Fuel Pump Cut out allowed if boxed back in and welded solid & rounded corners.
Chassis Options: 1955-2002 American Passenger Cars (S-10's GMT 400/800-SN95/FOX ok)  All Cars must have OEM Stamped Steel Ford or GM or Mopar Front Lower Control arms.
OEM Leaf & OEM Coil rear Suspensions only.
GRAPHICS FOR NUMBER ON ROOF FACES STANDS Contrasting Numbers -Plain-Legible on doors 20" minimum Car Numbers.
METAL BODY: 1936 or newer, Muscle Car - Wedge Car, body styles. Must Protect Drivers. Maximum Body Width Tire Sidewall. Sealed Interior Metal Firewall and Floor & over top of Driveshaft minimum sized holes for throttle, etc. 14"+ minimum Drivers Side Cockpit Opening. Body Cannot Obstruct Other Competitors' View for Safety. Aftermarket Racing Plastic Quarters & Front Fenders ok. No part of the car allowed more than 48" forward of front Spindle or 48” rearward of Axle.
NOSE: Plastic Noses & Tail Panels Optional. Racer may fabricate Aluminum Wedge Nose W/ Two Plastic corners. Square & Level across the front only, no crooked front ends. Nose Maximum one inch wider than front Tread with wheels pointed straight & no narrower than front Rotors. OEM bumpers don’t require a Nose & can be top halved.
Fenders: Metal or Plastic Fenders ok, Fenders can remain open from Spindle to Mid-plate. Rear of Fender can tuck inside nose plastics.
HOOD: Metal Only. Must cover the top of the engine and radiator & seal at deck. Air Cleaner Hole ok. Scoops - Cannot Block Drivers View - No obstructions.
Deck: Metal Only. Deck begins within 12” rear of Flywheel. 41" Maximum Rear Deck height. Maximum Width Deck 66”. 6.6" Maximum Rake on Deck. Open top interiors optional. OEM Trunks optional.
Hood 3" Rake Max, Flat Decks Side to Side Front to Rear.
Doors & Quarters: No Fiberglass. 14" Minimum Driver Door Window Access & 12" Minimum Static Window Opening. Door Skins min 26" to max 34” Tall with 4” ground clearance. Quarter Panel Length 38" to 48" Maximum from Axle to Rear Body Line.
General Sheetmetal Rules: No Concave Body Panels to trap air. Footwell behind Flywheel. Extended Footwells require Steel Plate & Blow out Protection. Metal Drivers Interior must be sealed. Body Max Width outside Tread side to side, Flare 3" at front of Right Rear Tire ok. No narrower than Rotors or Frame. Right line front Frame to rear outer Tread + Flair ok. No Sharp Bumpers or Edges-Tire Cutters.
Spoiler: 8" Deck Spoiler Max Height, No Portion of Deck Spoiler may be over 47" Tall. Spoiler within Sideboards & uniform, Rear Spoilers Max Width 60”.  Optional "F40" Rear Wing Spoiler. No higher than Roof & 60" Maximum width. 8" Maximum depth.
Rear: Rear "Rock-Catcher" Aluminum Panel, 6"+ vertical measurement from Deck, angled up to 45* ok or Tail Plastics. Quarter Plastics allowed. (ABC, S2, SGN, Dominator, stock-style Okay). Tail light graphics okay.
Roof: Compact or Sub-Compact Fastback OEM Steel Roof, may fabricate OEM Metal Roof or "SPEEDWAY" #91054175 Styles. Approximate-Maximum 58" & 46” Minimum height & 3” Maximum Rake. Must bolt to Cage w/ Four Bolts. Steel rollover Protection panel affixed above Halo recommended if not Steel Roof.- 52" from frame Maximum height.
Sail Panel: Fastback, Coupe, Opera, Camaro or Open NOVA/Daytona. 3D ok, no air traps. "C" Pillar inboard of Quarter Panel 3" ok. Stock/Wedge Car appearance. Sail Panels remain Flat.
Shocks: No Bulbs or external chambers allowed. 4 Shocks per Car. Stock Mount Only: Bilstein/Doetsch-TECH/KYB/Koni Classic. Welded Heim Ends: PRO WB Steel, Doetsch-TECH, QA1 EC, "Carrera" & Pro "SS" Series okay. Four shocks per car using one per tire.
REAR AXLE Magnetic Rear end housing must be stock Steel Tubes only. May have three Hole Trailing Arm Mounts. Ford 9" Ok. Jeep, GM, Ford, Chrysler.(7.5", 7.625", DANA 44, 8.25",8.5", 8.8", etc) Strange & Moser Etc Okay. No Magnesium or Aluminum allowed. All Mounts Affixed, no sliding or rolling Mounts. Must Be LOCKED. Bracing optional. After-market axles, studs, and mini-spools are okay. Rear end axles must be locked together at all times, Spiders may rock. No 8 Lugs. Mandatory Left & Right DISC BRAKES & Caliper & Pads. No Floaters.
DRIVE SHAFT Must be painted white or silver or fluorescent orange. Must have steel drive shaft loop (360 degree) connected to the frame located within 6" rear of the front drive shaft u-joint. Minimum size is 2" X 1/8". Balance ok. NO CARBON FIBER! Steel Only.
Brakes MUST HAVE FRONT & REAR BRAKES, Remote Driver adjust allowed. Racing Master Cylinders With Aftermarket Pedal ok. Front OEM style rotors only, no oil bath hubs. No aluminum brake components allowed. OEM magnetic Calipers only. Mandatory Magnetic Rear Discs up to 12" disc brakes. Rear Rotors with Hats dual vane only. Solid Hats only. 5/8" studs are Required, passenger car Studs must be upgraded. Bolt pattern chevy or ford. Working hydraulic brakes front & Rear mandatory. No Drum Brakes, No aluminum brake parts. Maximum Two Brake Master Cylinders, Aftermarket Pedal Assembly ok, Wilwood, AFCO or Tilton Styles, may have Driver adjustable Front to Rear Manual Bias Control. OEM Style front Rotors only, Rear Rotors may be Floating OEM only. OEM Style Single Piston Magnetic Calipers only.
Ignition: HEI & OEM Electronic Distributors Only. HEI Rev Limiters MSD #83647 Circuit Board or similar ok. Vacuum advance may be removed and the pick-up coil locked. 6AL MSD Ignition Boxes or off brand maximum, 6000's MSD or "Daytona Smart" Box is allowed with OEM or parts house stock replacement Coils & Wires only. No Traction Control allowed.  No magnetos. Ignition Kill switch must be located within reach from outside the car.
Control Arms: Steel Tubular Front Upper ok, Steel Fabricated Mount ok. Front Lower stamped Arms Only. Steel Trailing Arms, tubed or boxed ok. No Softy Bushings in trailing arms, must be OEM type. Grease Zerks ok on all moving suspension parts.
Steering: Steel Gearbox in OEM Mounts, Quick Steer Ok, Steel Pump on Engine only. Steel Idler in OEM Mounts, Pass Side single adjuster outer Tie Rod okay, ANY OEM type Tie Rods that fit Spindles & Center Link, Quick Steer Okay, Steel Pump on Engine. Quick release steering wheel is mandatory. No chains or sprockets allowed in the steering system. Bump steer cannot be adjusted. QA1 Ball Joints ok. Only FOX/SN95 Complete front Clips are allowed OEM Rack & Pinion.
Coil Springs: Four Steel Coil Springs Maximum, 5"-15" Max Length 3"-5.5" O.D., No 5th Coils. Corrected Spring bucket ok, Jack Bolts & Adjustable Cups ok.
*Driver: Drivers Feet rear of Flywheel/Firewall, Driver Left of Driveshaft & Forward of 3rd Member. Minimum Steel door Plate Under Seat. Steel plate over Drivers door bars protects Driver seat minimum.
CHASSIS: Frame: 107+” Minimum Wheelbase. G-Body Specs ok. Full Frame & Clips May Modify- adapt factory Coil Spring Rear Clip. Coil Spring Bucket & Jack Bolts allowed front & rear. Plating Crush zones & body mounts ok. All Chassis must remain OEM Parallel & True & straight, No Wedge or Crooked Chopping. Camaro Clips to Rear Motor Mount preferred. No Round Tube Front Clips. No Aftermarket Rack & Pinions Allowed. Leaf Camaro may adapt OEM Coil Spring rear Clip. OEM Frame's may shorten to 108” wheelbase. Frames/Clips may be straight Rail heavy tubing on Passenger side from behind lower control arm Stanchion to rear Suspension Mount, eliminating perimeter right side frame rail.
FRONT SUSPENSION: Steel parts only. Front Upper Control Arm mounts must be welded. Must use uncut OEM Crossmember. OEM Stanchion holes may be corrected. Corrected spring buckets ok. Front Springs 4 ½” minimum diameter. Big Body may have notches for tubular upper control arms. Only SN95/FOX approved OEM Rack & Pinions.
Front Control Arms: Tubular Steel Upper Front Arms & Aftermarket steel Upper Mounts okay. Any Combo front offset okay. Must accept OEM style Ball Joint. Upper Control Arm Mount & Bolt Pattern may be changed. Nova & S-10 & G-Body Front Lower Optional. Stamped Steel Lower Control arms must be either Ford, Mopar or GM with OEM style Bushings, Grease zerks okay.
Spindles: USA OEM Disk type, Chevy, Mopar & Ford, car or light truck. OEM Style Hubs & Spindles only. SR Spindles= Speedway / ARGO /AFCO - Styles. Must be Cast or Forged Magnetic. No Wet Bath hubs. No Fabricated Tubular Spindles allowed. No Aluminum. Strut Spindles with upper ball joint adapter allowed. Hub with Kotter key & Castle Nut required on spindles. C-3 ok.
OEM REAR SUSPENSIONS ONLY: OEM GM or Ford 4 Link OEM COIL Spring Rear Frame Only. Leaf Clips may swap to OEM Rear Coil Clip with Axle mounted Centered. OEM COIL Suspensions: General Motors & Ford & Jeep only. 1982-2002 Camaro Torque ARM: Must Use OEM lower Trailing Arms. Optional 3rd Link with OEM Trailing Arm & Bushings. 3rd Link may be mounted Centered over Driveshaft or just right of Cast housing on Axle Tube or bolted to existing Torque Arm Mount. Panhard Bar minimum length is 19” and is mounted on the rear of the housing or axle tube. No Biscuit or Spring Rods allowed.
SPRINGS: Steel Coil Springs, 15" Max Height, 4.5"- 5.5” diameter. Two Coil Springs only, one per side allowed. Coil Spring perch solid on Housing. Upper Jack-bolts or adjustable Spring cups okay, Spring perch affixed Center Tube. No Coil-Overs or Eliminators & No floating Mounts.
Trailing Arms: OEM Style, may be Boxed w/ OEM Style Bushings. OEM Arms may be matched to Differential used. Speedway Motors | #91634055 No Softy Bushings. ALL Trailing Arms remain OEM equal lengths per side. Straps through rear Springs only. No Coilover Eliminators Allowed.
Leaf Springs: Camaro type. Steel Racing Brands ok. .LEAF SPRINGS Fabricated Rear Clip ok. Pivot Bushing/Trac-Rod/Toe Adjuster/Sliders-Shackle. Adjustable Suspension Mounts ok. Shackle/Dogbone/Sliders/Toe Adjuster ok. Calvert Style “Trac Rod” & J-Bar ok. Any bushing. Front Leaf Mount may have adjusting Holes & bolted Brackets. (Tube Subframe Clip to rear bumper for Leafs only. No Gutting Clips.) Moving hangers & inboard ok. Fabricated Leaf Spring over or underslung rear clip: 12 Gauge - Round 1 3/4" Tube or 2X2” Square Main Rail or Larger recommended: Fabricated Rear Clip ok (2x3”-095 or 2x2 110 or 1.5x120 etc).
ENGINE: 412” Maximum cubic inches. Block - OEM or GM19432110/BRO-RS400035842W, Ford & Mopar & GM OEM Blocks. (OEM Hydraulic Roller ok) Engines over 5.9 Liters require 500 CFM Carburetor.
Rockers - Steel only, Roller ok & up to two per shaft unless OEM.
Crankshaft: Aftermarket is limited to EAGLE-SCAT 9000 Cast Only. Internal or External Balance ok. No Billet or exotic Crankshafts allowed.
Rods - OEM/Powder/SCAT/EAGLE/LS. ARP Bolts & Cap Screw ok.
Pistons - Hypereutectic or Forged: SUMMIT-KB- TRW-SpeedPro-UEM-JEGS or OEM. 10.5-1 Maximum Total Compression. No Exotics.
Oil Pans: sight plug @ #. Wet Sumps only. Left Turn oval Pan ok,
OEM HEADS ONLY:  Iron Small Block Heads only Allowed Pocket Port & Bolt Tubes & Valve reliefs. Studs & Plates & Beehive ok. OEM Valve sizes only are maximum sizes. 3-5 Angle Valve job ok. Spring Pocket & Rocker clearance ok, Poly Locks ok. Stud Girdles & Vortec ok. No Titanium allowed. No Altering Casting numbers. Chamber Valve reliefs ok. OEM 5.9 Liter Engines Only Stock Replacement Heads = chamber valve reliefs only are allowed, otherwise race as is. Aluminum OEM heads are allowed 2.0" Maximum Intake & 1.6" Exhaust Valve sizes maximum. No Overhead Cam heads allowed.
Aftermarket Iron Heads: Race As Is. ALL Port & Runners Race As-is with Thick Decks only! No Porting or Polishing or Milling. Absolutely no Angle Milling. OEM Valve Angles only. Steel Rocker Arms: Roller Tip ok. - 1.6 Ratio Maximum. Spacers & Bushings ok, Magnetic. 2.02” Intake Valve X 1.6" Exhaust Valves 200cc maximum.
Intake Manifold: Single Carb, No 2 piece/exoticsH2O Lines Ok. Mid-Rise Maximum. Alloy or Iron/Steel.
CARBURETORS: Choke horn required with OEM Number. No HP or XP allowed. 2nd Safety Spring required. Clamp all Lines. Solid Top Metal Air Filter Housing. Air Filter must be present to compete.
FUEL PUMP Only stock mount pushrod activated OEM style allowed. No bypass fuel systems or regulators or Belt Driven. Unleaded only, Gasoline only.
EXHAUST: OEM Exhaust Manifolds, Dorman Re-Pops ok. Any Collector Welded or Threaded ok. No Exotics allowed. Extended Collectors & X pipe ok. All cars may require Mufflers if Track Mandates.
BATTERY: 12 volt battery only allowed, maximum two & may be charged by an alternator. 12 volt only. Securely Mounted, Sealed only or in Sealed case. No Push Start Cars. Cars must be self sufficient & self starting.
RADIATOR Brass/Copper or Aluminum. Radiator front of engine. Catch Cans Required. Transmission Cooler allowed inside Engine Radiator or Separate. Electric Fans ok.
OEM TRANSMISSION: Automatic or Standards only. OEM-Mitchell Machine ok. Dummy Converters okay. Self-starting with working neutral, reverse, and forward. All Cars must have Steel Front Drive Shaft Hoop. Steel Driveshaft only. Transmission fluid coolers ok. Safety shield 180 degrees over clutch assembly. Slave cylinders & hydraulic throw out bearing ok. Aftermarket Steel Bellhousings ok. Ultrabells ok. No Direct Drives allowed. Jericho/Borg Warner 3 & 4 Speeds allowed with 100 Pound Penalty. No Brinn or Bert or Falcon styles. No Aftermarket Two Speeds allowed.
ROLL CAGE: Eight Point minimum. Made in USA Steel only. Driver Seat must be forward of rear Cross-member & Left of Drivetrain & behind Engine. Main roll cage must consist of continuous hoops not less than 1-1/2" X .095", DOM recommended. Some Sanctions require 1 ⅝” or 1.75" Main Cage. All welds must be complete. A minimum three Driver (3) & two Passenger side Door bars. X-bracing is allowed. Driver Door plates mandatory 16" X 16" min. USA Mild steel Cages NO chrome-moly. Must have a front drive shaft hoop, no chains allowed unless welded solid. Ballast must be safely painted, marked and Securely Bolted down for Safety. 2 Seaters require Drivers safety items on both sides. Rail present drivers side & beyond the base of driver’s seat for Door Bars. Only USA Mild Steel Round tubing, No Chromoly. 1.5" 0.95 minimum & w/ vertical supports. Rear Down Bars & kickers weld on either side of the Fuel Cell. Minimum Eight Point Cage Chassis, 2" minimum Clearance from Drivers Helmet. Minimum Four ⅜”.Windshield Bars. Welded Tabs - Eye's 1/2" for Harness & Seat 3/8" Securely Mount with Bolts & Must pass Tech Safety Inspection. "X" Bracing allowed, Gussets & Cross Bracing required. Front Driveshaft Hoop Required. Engine Must Safely Mount in Chassis, Body Must Mount to Chassis in Secure Fashion. Cage must serve as protection for Driver and other competitors as a Priority.
WINDSHIELD BARS Minimum of three (4) windshield bars 3/8" in diameter is required. Front of driver. #3 Rebar OK. NERF BARS Single bar or “hooped” door Nerfs allowed. Maximum size = 1-1/2" X .095" x 2 or 1 ¾” single, attached to the cage at the front and rear sections of the nerf bar. No center supports, within tread. All bumpers and nerf bars must be capped and rounded. Hidden Behind Door Skin preferred.
DRAFTING BUMPERS 20” Nominal height. Flat Bar Must expose outside Nose minimum. Width Ball Joint to Center of Tire & may be stacked or hooped. 1.25-1.75" .095" max Round Tube or 2x2" square tube 13 Gauge maximum thickness. May Hide Behind Nose. No Plating reinforcement except for Mount. Required fuel cell protection bar (minimum size = 1-1/2" X .095"). Wrecker loop required. Must be exposed. Plastic or Aluminum nose behind/above bumper. Must absorb heavy Impacts so the driver doesn’t, Required front and rear. No Sharp Edges. May run 3" Flat strap or single Tube in front of Plastic Nose & Tail. Maximum width to Rotors. Minimum Wide as Frame & Wider than Fuel Cell. Must offer Wrecker Hoop. Metal OEM OK. Bumpers must be permanently attached so they don't fall off or break off.
G-Body's may require minimum weights to compete.
Power Performance all rights reserved. *Flying Body Panels and Bumpers is a Safety Hazard to Spectators & fellow Competitors & will be Black Flagged, Door skins required. Cars must pass Inspection from the Pit Steward before re-entering competition. Only approved personnel allowed in Hot Pits if used.
Fuel Cell 25 Gallon Maximum. Racing fuel Cell Required. Safety Steel Plate under Cell. One inch minimum tubing must be used frame to frame mounting cell. Must have Steel CAN & Small Cap w/flap & 2" Steel flat Straps Minimum. Located higher than 3rd Member. All Fuel Lines must be Clamped. NO Plastic Fuel Lines. 1 1/2” or larger Rear Fuel Cell Protection bar required.
BALLAST WEIGHT: Must be securely bolted and painted white w/ car number. Two ½” grade 8 bolts per 30-50 pounds of weight. Bare Iron Heads may be used as Ballast. No Ballast bolted on rear end housing allowed.
Race Car - High Performance Appearance Mandatory. No lights or speakers. No Glass Allowed.
Track may use Pace Car. No Rabbit Starts. Stock Cars always start side by side double stacked front to back. Green @ Cone/White line By Flag Man. Leader Starts the race & flagman throws Green Flag if it’s a fair start. All Restarts should be Double File, with Leader choosing inside or outside Lane and 2nd place car alongside. Single file restarts used only as a last resort to finish a race over time limit. Power Performance - All Rights Reserved.. Any Track may use these Rules. All Risk Lies with the Track, its competitors, personnel, & Fans, It’s up to the Track to enforce Safety & Provide Insurance for everyone involved. Racing is Dangerous. Proceed at your own risk.]]> https://www.askaluminium.com/Thread-CTP-Thermal-Double-Layers-Plate-CTCP-Plate-UV-Plate-PS-Plate-for-offset-paper-print Fri, 30 Aug 2024 07:04:54 +0000 hmwadeseo]]> https://www.askaluminium.com/Thread-CTP-Thermal-Double-Layers-Plate-CTCP-Plate-UV-Plate-PS-Plate-for-offset-paper-print How are you?
We are the manufacturer of these following products in China.
1. CTP Thermal Double Layers Plate, CTCP Plate/UV Plate, PS Plate for offset paper printing.
2. Sheetfed Processed CMYK Inks for offset paper printing.
3. Offset Sublimation Ink & Digital Ink for Epson Printer.

Please feel free to contact me +86 13598417520 WhatsApp/Wechat
E-mail address: wade@haomeicn.com
Looking forward to your early and positive reply to resume good and sound business relationships with you on a long term basis.
Thanking you
Maherban Ali]]> How are you?
We are the manufacturer of these following products in China.
1. CTP Thermal Double Layers Plate, CTCP Plate/UV Plate, PS Plate for offset paper printing.
2. Sheetfed Processed CMYK Inks for offset paper printing.
3. Offset Sublimation Ink & Digital Ink for Epson Printer.

Please feel free to contact me +86 13598417520 WhatsApp/Wechat
E-mail address: wade@haomeicn.com
Looking forward to your early and positive reply to resume good and sound business relationships with you on a long term basis.
Thanking you
Maherban Ali]]> https://www.askaluminium.com/Thread-We-are-a-company-specializing-in-Aluminum-products Tue, 13 Aug 2024 07:07:38 +0000 hmwadeseo]]> https://www.askaluminium.com/Thread-We-are-a-company-specializing-in-Aluminum-products
We can supply AL-plate/coil/foil of more than 10 alloy bands including 1xxx, 3xxx, 5xxx, 6xxxand 8xxx series. The main products include aluminum sheet, coil, foil, air-container foil, cablefoil, electronic capacitor foil, blister foil, flexible packaging foil, CTP stock, litho stock, cap stock, tread plate, embossed coil, mirror panels, cans cover materials, aerospace alu-minum, mold aluminum materials, etc. At the same time, we process a variety of products according to requirements of different customers.

In order to better understand your needs and cooperation intentions, we sincerely invite you to visit our company, or further communicate via phone/email. We can also provide more detailed product information, samples, or quotations according to your requirements.

Looking forward to your reply and hoping for the opportunity to work with you.

wade@haomeicn.com]]>
We can supply AL-plate/coil/foil of more than 10 alloy bands including 1xxx, 3xxx, 5xxx, 6xxxand 8xxx series. The main products include aluminum sheet, coil, foil, air-container foil, cablefoil, electronic capacitor foil, blister foil, flexible packaging foil, CTP stock, litho stock, cap stock, tread plate, embossed coil, mirror panels, cans cover materials, aerospace alu-minum, mold aluminum materials, etc. At the same time, we process a variety of products according to requirements of different customers.

In order to better understand your needs and cooperation intentions, we sincerely invite you to visit our company, or further communicate via phone/email. We can also provide more detailed product information, samples, or quotations according to your requirements.

Looking forward to your reply and hoping for the opportunity to work with you.

wade@haomeicn.com]]> https://www.askaluminium.com/Thread-The-fur-industry-provides-economic-benefits-by-supporting-jobs-and-livelihoods-in-var Tue, 09 Jul 2024 08:38:15 +0000 Byfursgame]]> https://www.askaluminium.com/Thread-The-fur-industry-provides-economic-benefits-by-supporting-jobs-and-livelihoods-in-var https://www.byfurs.com/ on the fur trade for their economic well-being, making it a crucial part of their local
Wearing fur offers a unique blend of practical and aesthetic benefits.
Its superior warmth, breathability, durability, and timeless elegance make it a valuable addition to any wardrobe. Additionally, fur's sustainability and cultural significance further enhance its https://www.byfurs.com/mens-furs appeal. By choosing fur, you're not only embracing a luxurious and stylish material but also supporting responsible and eco-friendly practices. As with any fashion choice, it's essential to consider the source and opt for ethically and sustainably produced fur to ensure that your decision aligns with your values.]]> https://www.byfurs.com/ on the fur trade for their economic well-being, making it a crucial part of their local
Wearing fur offers a unique blend of practical and aesthetic benefits.
Its superior warmth, breathability, durability, and timeless elegance make it a valuable addition to any wardrobe. Additionally, fur's sustainability and cultural significance further enhance its https://www.byfurs.com/mens-furs appeal. By choosing fur, you're not only embracing a luxurious and stylish material but also supporting responsible and eco-friendly practices. As with any fashion choice, it's essential to consider the source and opt for ethically and sustainably produced fur to ensure that your decision aligns with your values.]]> https://www.askaluminium.com/Thread-Aluminum-plate-manufacturer-5182-ring-pull-material-aluminum-plate-3004-3104 Tue, 28 May 2024 09:15:39 +0000 mingtaial]]> https://www.askaluminium.com/Thread-Aluminum-plate-manufacturer-5182-ring-pull-material-aluminum-plate-3004-3104 5182 ring pull material aluminum plate 3004 3104 can lid material aluminum plate advantages
1. Deep drawing performance and dosage, widely used in tank materials;
2. It has good processing characteristics, excellent welding and corrosion resistance
3. Low density, high strength, easy to form, high recyclability and value;
4. Good version, high flatness, and precise thickness control;
5. High strength, good corrosion resistance, durable, economical and environmentally friendly.
5182 ring pull material aluminum plate 3004 3104 can lid material aluminum plate
5182 ring pull aluminum plate 3004 3104 can lid material aluminum plate price? This is a question that many users come to inquire about. The price ranges from high to low. There is no specific fixed value on the market. The price depends on the selection. Various factors such as product specification requirements and selected manufacturers are comprehensively considered. Among them, the quotations given by direct selling manufacturers will be relatively cheaper, because the 5182 ring pull aluminum plates | 3004/3104 can lid aluminum plates produced by these manufacturers are all shipped directly from the factory, and there is no price difference. For example, Mingtai Aluminum Factory direct sales, the product prices given are relatively more favorable!
5182 ring pull material aluminum plate 3004 3104 can lid material aluminum plate manufacturer direct sales quotation
5182 ring pull material aluminum plate 3004 3104 can lid material aluminum plate manufacturer - Mingtai Aluminum workshop has some products in stock, its shipping specifications are relatively complete, the variety is sufficient, and can be customized on demand to meet the needs of different users, Mingtai Aluminum Our products are all ex-factory wholesale prices. If you don’t know how to choose the appropriate 5182 ring pull aluminum plate 3004/3104 can lid aluminum plate, you can find Mingtai professionals to guide you in your selection and give you more detailed and cost-effective advice. Discounted offers.]]> 5182 ring pull material aluminum plate 3004 3104 can lid material aluminum plate advantages
1. Deep drawing performance and dosage, widely used in tank materials;
2. It has good processing characteristics, excellent welding and corrosion resistance
3. Low density, high strength, easy to form, high recyclability and value;
4. Good version, high flatness, and precise thickness control;
5. High strength, good corrosion resistance, durable, economical and environmentally friendly.
5182 ring pull material aluminum plate 3004 3104 can lid material aluminum plate
5182 ring pull aluminum plate 3004 3104 can lid material aluminum plate price? This is a question that many users come to inquire about. The price ranges from high to low. There is no specific fixed value on the market. The price depends on the selection. Various factors such as product specification requirements and selected manufacturers are comprehensively considered. Among them, the quotations given by direct selling manufacturers will be relatively cheaper, because the 5182 ring pull aluminum plates | 3004/3104 can lid aluminum plates produced by these manufacturers are all shipped directly from the factory, and there is no price difference. For example, Mingtai Aluminum Factory direct sales, the product prices given are relatively more favorable!
5182 ring pull material aluminum plate 3004 3104 can lid material aluminum plate manufacturer direct sales quotation
5182 ring pull material aluminum plate 3004 3104 can lid material aluminum plate manufacturer - Mingtai Aluminum workshop has some products in stock, its shipping specifications are relatively complete, the variety is sufficient, and can be customized on demand to meet the needs of different users, Mingtai Aluminum Our products are all ex-factory wholesale prices. If you don’t know how to choose the appropriate 5182 ring pull aluminum plate 3004/3104 can lid aluminum plate, you can find Mingtai professionals to guide you in your selection and give you more detailed and cost-effective advice. Discounted offers.]]> https://www.askaluminium.com/Thread-5052-aluminum-plate-manufacturer-Mingtai-Aluminum-provides-one-stop-service Fri, 24 May 2024 08:48:31 +0000 mingtaial]]> https://www.askaluminium.com/Thread-5052-aluminum-plate-manufacturer-Mingtai-Aluminum-provides-one-stop-service 5052 aluminum plate is a typical rust-proof aluminum plate with good processing performance, high strength and wide range of uses. As a professional 5052 aluminum plate manufacturer, Mingtai Aluminum has advanced equipment and skilled production technology. The 5052 aluminum plates produced are widely used in silos, GIS shells, ships, automobile lightweighting, molds, fuel tanks, and precision machining. and other fields. So far, Mingtai Aluminum's 5052 aluminum plate production has reached 1.4 million tons, and its market reputation is very good.
Previously, there were only a few domestic 5052 aluminum plate manufacturers, and prices were always high and delivery times were long, resulting in a shortage of 5052 aluminum plates. After the 1+4 hot-rolling production line of Mingtai Aluminum was put into operation, the monopoly of the Southwest Aluminum market was gradually broken. Mingtai Aluminum's 5052 aluminum plates have quickly gained market recognition due to their advantages of good quality, high output, affordable prices, and fast delivery.
Performance advantages of Mingtai Aluminum 5052 aluminum plate
1. There is no peeling, bubbles, surface roughness and local mechanical damage on the surface of the aluminum plate. There are no cracks, corrosion spots and traces of nitrate on the surface.
2. 5052 aluminum plate has high plasticity and strong corrosion resistance, and is suitable for use in marine environments. It is also widely used in automobile lightweighting.
3. Mingtai Aluminum’s 5052 aluminum plates can have a width of 2600mm and a thickness of 600mm. They are one of the few domestic manufacturers that can produce ultra-wide and ultra-thick 5052 aluminum plates.
Mingtai Aluminum provides one-stop service
The delivery time of Mingtai Aluminum's 5052 aluminum plates is 10-35 days, providing a full range of one-stop services. We track every order in a timely manner from pre-sales consultation to after-sales delivery to ensure that the product is intact. For product packaging, we use paper or film to ensure that the surface of the aluminum plate is intact without scratches; we also install wooden pallets and reinforce it with steel strips to avoid collisions during transportation and ensure that the geometric shape of the aluminum plate remains unchanged.]]> 5052 aluminum plate is a typical rust-proof aluminum plate with good processing performance, high strength and wide range of uses. As a professional 5052 aluminum plate manufacturer, Mingtai Aluminum has advanced equipment and skilled production technology. The 5052 aluminum plates produced are widely used in silos, GIS shells, ships, automobile lightweighting, molds, fuel tanks, and precision machining. and other fields. So far, Mingtai Aluminum's 5052 aluminum plate production has reached 1.4 million tons, and its market reputation is very good.
Previously, there were only a few domestic 5052 aluminum plate manufacturers, and prices were always high and delivery times were long, resulting in a shortage of 5052 aluminum plates. After the 1+4 hot-rolling production line of Mingtai Aluminum was put into operation, the monopoly of the Southwest Aluminum market was gradually broken. Mingtai Aluminum's 5052 aluminum plates have quickly gained market recognition due to their advantages of good quality, high output, affordable prices, and fast delivery.
Performance advantages of Mingtai Aluminum 5052 aluminum plate
1. There is no peeling, bubbles, surface roughness and local mechanical damage on the surface of the aluminum plate. There are no cracks, corrosion spots and traces of nitrate on the surface.
2. 5052 aluminum plate has high plasticity and strong corrosion resistance, and is suitable for use in marine environments. It is also widely used in automobile lightweighting.
3. Mingtai Aluminum’s 5052 aluminum plates can have a width of 2600mm and a thickness of 600mm. They are one of the few domestic manufacturers that can produce ultra-wide and ultra-thick 5052 aluminum plates.
Mingtai Aluminum provides one-stop service
The delivery time of Mingtai Aluminum's 5052 aluminum plates is 10-35 days, providing a full range of one-stop services. We track every order in a timely manner from pre-sales consultation to after-sales delivery to ensure that the product is intact. For product packaging, we use paper or film to ensure that the surface of the aluminum plate is intact without scratches; we also install wooden pallets and reinforce it with steel strips to avoid collisions during transportation and ensure that the geometric shape of the aluminum plate remains unchanged.]]>