+- ask aluminium Forum (https://www.askaluminium.com)
+-- Forum: My Category (https://www.askaluminium.com/Forum-My-Category)
+--- Forum: aluminium faq (https://www.askaluminium.com/Forum-aluminium-faq)
+--- Thread: 5052 aluminum sheet strip for can lids (/Thread-5052-aluminum-sheet-strip-for-can-lids)
5052 aluminum sheet strip for can lids - mingtaialu - 12-30-2024
Aluminum cans boast benefits such as being lightweight, heat-resistant, highly conductive, odorless, non-toxic, and offering exceptional print quality. Additionally, they are resistant to acid and alkali corrosion, durable, recyclable, cost-effective, and eco-friendly. Currently, aluminum alloy serves as the primary material for can production.
The aluminum alloy cans are crafted from various alloys depending on their part. Typically, the lid (or bottom) of the can utilizes 5052 or [b]3104 aluminum sheet/strip[/b], while the pull ring is made from 5182 aluminum sheet.
[b]5052 aluminum alloy for can lid[/b]
Gwangyang Aluminum boasts a comprehensive production setup and well-established manufacturing techniques. Our 5052 aluminum sheets/strips exhibit exceptional flatness and achieve highly precise thickness regulation, guaranteeing a tolerance of ±0.005mm, facilitating reliable subsequent processing, and aligning perfectly with customer requirements.
[b]5052 aluminum sheet strip for can lids quality control requirements[/b]
- Flatness: Strips are not allowed to have obvious waves, wave height within 1 meter does not exceed 3mm, and waves do not exceed 3/meter;
- Side curvature: The side curvature of the product on any 2000mm length should not be greater than 0.5mm;
- End warping: The height of the end warping is ≤5mm for any 1500mm length of product cut;
- Joints: No joints are allowed.
- Surface: No serious bubbles, missing coating, scratches, corrosion, oil spots, peeling, stripes, color difference, spots, roller marks, periodicity, etc. that affect the appearance quality of the product are allowed, burrs <= 0.04mm;
- End face: The end face is neat, rolled tightly without loose layers, staggered layers ≤2mm, and tower shapes ≤5mm.