Alloy 6082 is typically supplied as plate and sheet. it is an aluminum primarily alloyed with silicon and manganese. The addition of manganese controls the grain structure which in turn results in a stronger alloy. The most common tempers for 6082 aluminum are O, T4, T6 and T651 and 6082 is slightly higher mechanical properties in the T6 condition when bending or forming. 6082 aluminum sheet also corresponds to DIN 3.2315, EN AW-6082 and AA6082 standard designations and specifications but may not be a direct equivalent.
 
Packing
Our packing meets the sea export standard. PE/PVC protective film or white paper could be covered as customer's need. Special requirements of packing could be negotiate before order.
     
 
Application
Typical material properties for 6082 aluminum alloy include weld ability, bribability, solder ability se well as mach inability. Besides, alloy 6082 is a medium strength alloy with excellent corrosion resistance. So various commercial joining methods (welding, brazing, etc.) can be easily applied to 6082 alloy. Since 6082 is a heat treatable alloy, strength will be reduced in the weld region. 6082 aluminum sheet and plate are typically formed by rolling. 6082 aluminum plate and sheet for highly stressed applications includes trusses, bridges, cranes, transport applications as well as mould.
 
       
  

Chemical and physical properties

(08-01-2019, 12:55 AM)geeksquadsupport Wrote: This is the one thing all three services have in common.  The quality of the technician varies based on skill set and luck of the draw. Some days you may get a good a good technician; some days you may get a tech who is on his first week of the job.  The quality of the technician (or Geek) can be difficult to measure and can change on a daily basis so we have to look at other factors that may influence your decision on which tech support service to use.

geek squad tech support  |  geek squad tech support