+- ask aluminium Forum (https://www.askaluminium.com)
+-- Forum: My Category (https://www.askaluminium.com/Forum-My-Category)
+--- Forum: aluminium faq (https://www.askaluminium.com/Forum-aluminium-faq)
+--- Thread: Who are the leading aluminum stucco embossed sheet manufacturers? (/Thread-Who-are-the-leading-aluminum-stucco-embossed-sheet-manufacturers)
Who are the leading aluminum stucco embossed sheet manufacturers? - aluminiumsheet - 07-20-2018
Among leading aluminum stucco embossed sheet manufacturers in China, Haomei has advanced online continuous quenching equipment, grinding equipment and products of novel design and long service life.
To improve its productivity in response to increasing ordering amount from home and abroad, Haomei invested in and built two online continuous quenching lines successively. The lines have greatly enhanced production speed under the precondition of keeping stable properties of aluminum stucco embossed sheet. They need only eight to sixteen hours to finish quenching of the sheets, shortening production periods substantially. They can deal with aluminum stucco embossed sheets of width between 850mm and 1650mm, thickness from 1.2mm to 10mm and length ranging from 600mm to 6500mm. In addition, a set of Italian grinding machine has been introduced to guarantee careful grounding and accurate operation of rolling devices. This greatly improves surface quality of our products that are highly glossy without any visible defects.
Benefiting from advanced equipment, Haomei quickly merged into the group of top aluminum stucco embossed sheet manufacturers in China. For years it has been offering products of novel design and long service life. Various patterns can be made, like diamond, bars, leaves, orange peals, pearls etc. The sheets show perfect anti-slip and decorative performance. They are so light that one square meter of sheet weighs only around 7 kilograms. The tensile strength reaches 200N/m2 and elongation higher than 10%. The sheet remains intact under strong warping force.
RE: Who are the leading aluminum stucco embossed sheet manufacturers? - ZellaHyday - 07-20-2018
There are many trusted embossed aluminium sheet manufacturers in China, and Haomei aluminum is one factory of them. The embossed aluminium sheet processed by Haomei is with low density, high tensile strength, high elongation and good thermal conductivity. 1060 pure aluminium and 3003 aluminium alloy are the commonly used grade for process embossed aluminium sheet. The embossed aluminium material is usually used to make the equipment casing, radiator, freezer drawer and evaporator.
There is one process method of the embossed aluminium sheet manufacturers, firstly completes embossing process in whole roll, and then divides and cuts into the embossed aluminium sheet of the required size, the process is simple, the efficiency is high, the manufacturing cost is saved, and the manufactured embossed aluminium sheet coil has high strength, acid resistance, alkali resistance and resistance. The specific steps are:
(1) unwinding for embossing;
(2) entering the longitudinal slitting machine through the conveying roller for longitudinal slitting;
(3) the longitudinally cut aluminum material is leveled by the conveying roller into the flattening machine, leveled and conveyed into the cross-cutting machine through the conveying roller, and the cross-cutting machine is cross-cut according to the required length, that is embossed aluminium sheet.