+- ask aluminium Forum (https://www.askaluminium.com)
+-- Forum: My Category (https://www.askaluminium.com/Forum-My-Category)
+--- Forum: aluminium faq (https://www.askaluminium.com/Forum-aluminium-faq)
+--- Thread: Will a 11 lbs Solid Forged Steel Anvil be good to shape Copper Nuggets Tin Ingot (/Thread-Will-a-11-lbs-Solid-Forged-Steel-Anvil-be-good-to-shape-Copper-Nuggets-Tin-Ingot--34892)
Will a 11 lbs Solid Forged Steel Anvil be good to shape Copper Nuggets Tin Ingot - Bobakata - 01-17-2020
Will a 11 lbs Solid Forged Steel Anvil be good to shape Copper Nuggets, Tin Ingots, Lead Ingots, And/Or Aluminum Ingots? And /or on any.?That\'s a little light, but if those items can be forged by a hammer less than 1lb then it should be okThe general rule of thumb is 1lb of hammer to every 20lbs of anvilSince you aren\'t blacksmithing I think you can get away with pushing that ruleIf the anvil does jump around you can mount it on a heavy steel plate to add mass.Other related question
- aluminum sheet
- aluminum products
- aluminum plate
- alloys aluminum
- aluminium strips
- aluminum strips
- aluminum strip
- aluminum foil
- aluminum supplier