Aluminum Strip For Lamp Base - Printable Version +- ask aluminium Forum (https://www.askaluminium.com) +-- Forum: My Category (https://www.askaluminium.com/Forum-My-Category) +--- Forum: Knowledge & Technique (https://www.askaluminium.com/Forum-Knowledge-Technique) +--- Thread: Aluminum Strip For Lamp Base (/Thread-Aluminum-Strip-For-Lamp-Base)

Aluminum Strip For Lamp Base - aluhm - 03-28-2018 Aluminum strips for lamp base is also called aluminum strips for lamp heads oraluminum strip for lamp cap. It is aluminum tape shape product. The aluminum lamp base need to be punched and then tapped into spiral shape, the material is thin and needs to withstand a certain pressure, so the aluminum lamp base material needs to have high mechanical strength, uniform micro structure and deep drawing properties. Thus 1000 series aluminum and 3000 series aluminum can be the suitable material, the width of lamp base is always thinner, so the material for making lamp base is aluminum strips. The aluminum grade of aluminum strips for lamp base is 1050 aluminum alloy,1060 aluminum alloy, 1070 aluminum alloy, 1100 aluminum alloy, 3004 aluminum alloy, 3003 aluminum alloy, the most common seen is 3004 aluminum strip for lamp base(temper O). The temper is mainly H22 and O(fully annealed state). The product type can be sheet and coil. The common thickness is 0.7mm, 0.8mm and 1.0mm, or according to customer requirements, the thickness tolerance ±0.01mm. The width is 50-1500mm. The aluminum lamp base produce from 3004 aluminum strip has beautiful and smooth surface than other alloy, and there is no orange peel on the surface. According to the experience, castingaluminum strip material is more suitable for processing lamp base, 3004aluminum strips has the advantages of gflexibility, high forming strength, excellent electrical conductivity, stable continuous stamping process, neatly trimming, and significant oxidation plating effect. RE: Aluminum Strip For Lamp Base - 1-LVDCPN - 03-28-2018 To make aluminum lamp base cap, first stamping and then tapping into spiral shape, thinner materials and to withstand the pressure. Therefore, the  3004-Oaluminum strip need to be with high mechanical strength and uniform microstructure and deep drawing property. Currently haomei aluminum use the flat ingot hot rolling for producing blank holder with 3004-O aluminum alloy strip. To make this 3004 O aluminum alloy strip, we have to control the composition of the material and cast rolling process, the high temperature uniformity of annealing and final annealing process, it have good deep drawing quality, enough strength, good formability. [img=400x0]http://www.aluminiumstrip-hm.com/wp-content/uploads/2017/03/3004-O-aluminum-alloy-strip-for-lamp-cap-3.jpg[/img]3004-O aluminum alloy strip for aluminum lamp base cap Surface Type: a.Plain mill finish aluminum strip b.DOS oil lubricated finish c.Chromated finish d. One side golden/white/red/blue/black,etc other colored, other side protective lacquered e. both sides clear/transparent lacquered [img=300x0]http://www.aluminiumstrip-hm.com/wp-content/uploads/2017/03/AAEAAQAAAAAAAAdPAAAAJDEwMTFjYzYwLWMxYzAtNGI1Mi1hOTQ1LWM0MjY5YjgyYWMzMQ-300x300.jpg[/img]aluminium strip 20mm Detailed Product Description Alloy:3004 Temper:O, Thickness:0.25-0.4mm, Width:85-400mm, Diameter:76, 152mm Packing: Export standard, wooden pallet or wooden case; Application: Lamp Base , Lamp Cap, etc.