+- ask aluminium Forum (https://www.askaluminium.com)
+-- Forum: My Category (https://www.askaluminium.com/Forum-My-Category)
+--- Forum: Buying Leads (https://www.askaluminium.com/Forum-Buying-Leads)
+--- Thread: aluminium closure sheet 8011 (/Thread-aluminium-closure-sheet-8011)
aluminium closure sheet 8011 - aluminiumsheet - 03-27-2018
aluminium closure sheet 8011
1. Alloy: 8011, 3105
2. Temper: H14, H24, H16, H26
3. Pattern: rolled, degreased, pre-lubricated, pre-treated, lacquered
4. Thickness: 0.16 0.23mm
5. Width: 500 ~ 1200mm
6. Length: 500 ~ 1200mm
7. Coil ID: 75, 150, 300, 500, etc
8. Origin: China
9. Performance of printed aluminum sheet:
1) In complete sizes and sorts, with clear and beautiful pattern.
2) If applying fluorescence, change to different temperatures and composite anti-forging printing technique, the effect will be better.
3) High temperature resistant without any distortion and color change;
4) The paint won't peel off during production;
5) Tensile Strength: 145;
6) Yield Strength: 136-137;
7) Elongation: 2.0;
8) Earing Rate: <2%;
9) It's the best material for medicine/wine caps;
10) Small order is acceptable.
10. Payment Terms: 30% by TT in advance as deposit and 70% balance by TT or L/C at sight;
Lead Time: Within 30 days after receiving deposit
Chemical Composition limits(WT.%)
Alloy
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
Al
8011
0.5~0.9
0.6~1.0
0.1
0.2
0.05
0.05
-
0.1
0.08
Remains
3105
0.6
0.7
0.3
0.3~0.8
0.2~0.8
0.2
-
0.4
0.1
Remains
Mechanical Property for Continuous Casting
Alloy
Temper
Thickness (mm)
U.T.S (Mpa)
Elongation (%)
8011
H14
0.16~0.23
185~205
>=2
Mechanical Property for Direct Casting
Alloy
Temper
Thickness (mm)
U.T.S (Mpa)
Elongation (%)
8011
H14
0.16~0.23
125~155
>=2
TOLERANCE
Thickness
Width
Length
Squareness
±0.005mm
±0.05mm
±0.05mm
≤0.3mm
Haomei supplies aluminum sheet and coils for the manufacture of bottle closures. Applications range from screw caps for whiskey and other beverage bottles to aluminum closures for wine bottles. ROPP cap material can be ordered as rolled, degreased, pre-lubed, pre-treated and / or lacquered
Aluminum - the ideal material for the production of bottle closures:
is light weight
is easily and economically recycled
has superior barrier qualities
has good formability
offers a bright finish for decoration.