1050 Color Coated Aluminium for composite panel - Printable Version +- ask aluminium Forum (https://www.askaluminium.com) +-- Forum: My Category (https://www.askaluminium.com/Forum-My-Category) +--- Forum: Buying Leads (https://www.askaluminium.com/Forum-Buying-Leads) +--- Thread: 1050 Color Coated Aluminium for composite panel (/Thread-1050-Color-Coated-Aluminium-for-composite-panel)

1050 Color Coated Aluminium for composite panel - toyota1515 - 03-15-2018 Specification of Color Coated Aluminum Coil 1.Substrates: Aluminium (AA1100, 3003, 3004, 3105, 5006, 5052, 8011, etc), etc. 2.Thickness: 0.08-4.0mm 3.Width: <1800mm 4.Coils core diameter: 150mm ,405mm, 505mm, 508mm, 510mm 5.Coating thickness: PVDF >=25micron POLYESTER>=18micron 6.Color standard: E < 2 or it is not obvious by eyeballing 7.Pencil hardness: > 2HB 8.Coating adhesive: not lower than first grade Impact: no any crack (50kg/cm, ASTMD-2794:1993) 9.Bend stength: >100 times 10.Boiling point: no any distortion and color change (in the 99 more or less 1 degree water, then cooling 2 hours) 11.Corrosive: surface deep in the 5% muriatic acid and 5% NaCL, interior deep in the 2% muriatic acid and 2% NaCL, after 48 hours, no change 12.Packing: Plastic film wrapped inside and carton packing. Wooden pallet with steel strip tied. Buyers can slao choose to pay for wooden case packing, which enables safer and more room saving in loading. Haomei Industrial Co. Ltd E-mail: wade@aluminium24.eu Tel:+86 (371) 6562-1391 Fax:+86 (371) 6562-1393 Address: 1103, First Int., No.14 Waihuan Road, CBD, Zhengzhou, China  http://aluminium-sheet.com