What is the surface requirements of 5052 aluminum plate? - Printable Version +- ask aluminium Forum (https://www.askaluminium.com) +-- Forum: My Category (https://www.askaluminium.com/Forum-My-Category) +--- Forum: aluminium faq (https://www.askaluminium.com/Forum-aluminium-faq) +--- Thread: What is the surface requirements of 5052 aluminum plate? (/Thread-What-is-the-surface-requirements-of-5052-aluminum-plate)

What is the surface requirements of 5052 aluminum plate? - aluhm - 01-18-2018 5052 aluminium precision plate in the production process requirements is very high. The aluminum plate surface does not allow cracks or corrosion spots and traces of nitrate. The 0.001-30mm Thickness 3003 Aluminum Brazing Sheet plate is not allowed to have a depth of more than 8% of the nominal size of the wall defects in the skin or bubbles. And the maximum depth of defects required less than 0.5 mm, the total defect area is less than 5% of the aluminum area. The last point is usually to allow the aluminum alloy sheet plate supplier to polish the profile longitudinally to a smooth surface. The above can be seen on the surface of the 5052 aluminum requirements are very high, so the production process is also required very sophisticated. RE: What is the surface requirements of 5052 aluminum plate? - haomeialu - 01-30-2018 5052 aluminum plate elongs to Al-Mg alloy, cold forming has good processing performance, processing performance, good corrosion resistance, rust proof aluminum alloy 5052 is a most widely used, this alloy has high strength, especially the anti fatigue strength, ductility and high corrosion resistance, in the semi cold hard plastic is good, do not 5052 alloy used for the internal pressure of the beverage cover, the status of H19 material, do first oxidation treatment to improve coating adhesion and corrosion resistance, both sides painted after the tank cover forming processing, my company production of 5052 alloy lid material with good surface quality, stable performance.     5052 aluminum plate of haomei aluminium is certificated to ASTM B209 and it can be cut to size at customers’ need. The primarily alloyed with magnesium and chromium which improve the strength of 5052 aluminum plate Products with different thickness have different tensile and yield strength, as well as elongation, all of which live to international standards. plate is stronger than 1100 and 3003 and it is an excellent candidate for most processing techniques. 5052 Aluminum Alloy plate is a medium strength alloy containing Magnesium as its major alloying element. 5052 Aluminum Alloy plate has good workability, a high fatigue strength and is very good for welding. It has very good corrosion resistance to seawater and the marine and industrial atmosphere. Typical applications include aircraft fuel/oil lines, fuel tanks, other transportation areas, sheet metal work, appliances and lighting, wire, and rivets. Performance advantage: 1,5052 Aluminum Alloy plate has high plasticity, corrosion resistance, suitable for use in marine environment; 2, the surface of the Aluminum Plate without peeling, bubble, surface rough and local mechanical damage, the surface of the Aluminum Plate without cracks and corrosion spots and trace nitrate;