12-18-2018, 01:47 AM
[font=微软雅黑]Nowadays, aluminum alloy plate is widely used in our lives. So we need to know some knowledge about it, like how to clean it. Specific aluminum cleaning steps are as follows:
1, first rinse the plate surface with plenty of water;
2, use a soft cloth soaked in water diluted detergent gently wipe plate surface;
3, then a large amount of water rinse the board, the dirt washed away;
4, check the board, for no clean place to use detergent to focus on cleaning;
5, rinse the plate with water until all the detergent washed.
![[Image: 1-1P115162321407.jpg]](https://www.mtaluminum.com/uploads/allimg/180115/1-1P115162321407.jpg)
Due to the low temperature properties of aluminum, all aluminum is used, and aluminum cleaning has become a prominent issue. The purpose of aluminum cleaning is to create good surface conditions for the welding between the aluminum surface and the aluminum oxide. However, in the aluminum plate welding process often found that there are pores on the surface of the weld, slag, incomplete penetration and so on.
CAUTION: Do not clean hot surfaces (temperatures in excess of 40 ° C) as excessive moisture volatilizes on the surface. In particular, please note that, please choose the right detergent, a basic principle is: be sure to choose a neutral detergent. Do not use strong alkaline detergents such as potassium hydroxide, sodium hydroxide or sodium carbonate, strong acid detergents, abrasive detergents, and paint soluble detergents.[/font]
1, first rinse the plate surface with plenty of water;
2, use a soft cloth soaked in water diluted detergent gently wipe plate surface;
3, then a large amount of water rinse the board, the dirt washed away;
4, check the board, for no clean place to use detergent to focus on cleaning;
5, rinse the plate with water until all the detergent washed.
Due to the low temperature properties of aluminum, all aluminum is used, and aluminum cleaning has become a prominent issue. The purpose of aluminum cleaning is to create good surface conditions for the welding between the aluminum surface and the aluminum oxide. However, in the aluminum plate welding process often found that there are pores on the surface of the weld, slag, incomplete penetration and so on.
CAUTION: Do not clean hot surfaces (temperatures in excess of 40 ° C) as excessive moisture volatilizes on the surface. In particular, please note that, please choose the right detergent, a basic principle is: be sure to choose a neutral detergent. Do not use strong alkaline detergents such as potassium hydroxide, sodium hydroxide or sodium carbonate, strong acid detergents, abrasive detergents, and paint soluble detergents.[/font]