MaximoOswa
08-12-2020, 05:49 AM
<p>
<br>
Brush aluminum sheet is refer to repeated with sandpaper to scrap the line of aluminum manufacturing process, the main process is divided into de-ester, sand mill, washed three parts. In the aluminum sheets drawing process, the anodised treatment after the special film technology, can make the surface of the aluminum plate sheet containing a metal composition of the film layer, clearly show every fine silk marks, so that metal matte glowing fine hair silk luster.<br><strong>Aluminium alloy sheet plate</strong> include many different models and types.Such as 6063 aluminum sheet, diamond aluminum checker plate, 5052 aluminum plate, 1060 aluminum plate sheet, 7075 aluminum sheet plate, mirror aluminum sheet, aluminum plate, embossed aluminum plate, 6063 aluminum plate, punching aluminum plate sheet, 5083 aluminum plate.<br>
According to the surface treatment for aluminum sheet may also be referred to as <strong>anodised aluminium sheet</strong>:The aluminum alloy sheets is placed in the corresponding electrolytic solution (such as sulfuric acid, chromic acid, oxalic acid, etc.) as an anode, under certain conditions and external current, the electrolysis and the formation of aluminum. Anodised aluminum plate oxidation, the surface of the formation of alumina thin layer, the thickness of 5 to 20 microns, hard anodic oxide film up to 60 to 200 microns.<br>
How to determine the quality of aluminum plate:<br>
The quality of aluminum sheet and hot rolled aluminum plate is good or bad, one is to see the brand and reputation, observe the surface of the aluminum plate, whether flat, Diaoqi scratches, etc., on both sides of the card bubble is full, with your fingers tapping board, listening to sound mixed slightly worse, the sound is slightly more crisp. Look at the thickness of the family with the general in 0.5 to 0.6 or so. If the floor is not good, thin will be soft, easy to deformation.</p>
<br>
Brush aluminum sheet is refer to repeated with sandpaper to scrap the line of aluminum manufacturing process, the main process is divided into de-ester, sand mill, washed three parts. In the aluminum sheets drawing process, the anodised treatment after the special film technology, can make the surface of the aluminum plate sheet containing a metal composition of the film layer, clearly show every fine silk marks, so that metal matte glowing fine hair silk luster.<br><strong>Aluminium alloy sheet plate</strong> include many different models and types.Such as 6063 aluminum sheet, diamond aluminum checker plate, 5052 aluminum plate, 1060 aluminum plate sheet, 7075 aluminum sheet plate, mirror aluminum sheet, aluminum plate, embossed aluminum plate, 6063 aluminum plate, punching aluminum plate sheet, 5083 aluminum plate.<br>
According to the surface treatment for aluminum sheet may also be referred to as <strong>anodised aluminium sheet</strong>:The aluminum alloy sheets is placed in the corresponding electrolytic solution (such as sulfuric acid, chromic acid, oxalic acid, etc.) as an anode, under certain conditions and external current, the electrolysis and the formation of aluminum. Anodised aluminum plate oxidation, the surface of the formation of alumina thin layer, the thickness of 5 to 20 microns, hard anodic oxide film up to 60 to 200 microns.<br>
How to determine the quality of aluminum plate:<br>
The quality of aluminum sheet and hot rolled aluminum plate is good or bad, one is to see the brand and reputation, observe the surface of the aluminum plate, whether flat, Diaoqi scratches, etc., on both sides of the card bubble is full, with your fingers tapping board, listening to sound mixed slightly worse, the sound is slightly more crisp. Look at the thickness of the family with the general in 0.5 to 0.6 or so. If the floor is not good, thin will be soft, easy to deformation.</p>