01-25-2018, 07:46 AM
Don't lie in the aluminous gusset plate thickness, the key lies in the aluminum texture, general engineering with aluminous gusset plate with 0.8 mm thick, even more, why? Because some projects with gusset plate is very long, in order to prevent deformation, so use a little thick, on the contrary, some high hardness, with Jiezhuang aluminum buckle, little more than 4 meters, and so not what weight aluminum buckle, ceiling decoration aluminum gusset plate, it can be said that 0.6 mm is enough with the. So, why did you come to the building materials market, many salespeople to tell you their 0.8 mm, a friend said someone introduced him to 0.88 mm; it is often because they not only take the board, so the thickness of Mongolia people -- it is destructive power.
5052 aluminum plate has many specifications, including panel width and the thickness of the plate, the height of the flanging etc.. Selection should be selected according to the characteristics of the home bathroom. Aluminum buckle into the surface of a punching and plane two. The surface piercing can ventilation sound-absorbing, laying a layer of soft film internal gusset plate, moisture can through punching be film absorption, so it is the most suitable for kitchen use more water. The market of 600mm * 600mm microporous square plate, F297H30 slat and M185H20 aluminum buckle was most widely used most widely.
In fact, 0.6 mm is enough. In the market of greater fame some imported brands of aluminous gusset plate as an example, the price per square metre in 300 yuan or more, but what is the thickness of it? 0.5 mm, less than 0.6 mm! Why, the board is not good or bad, but in the thickness of the substrate. In fact, if you seek advice is aluminum buckle brand name, mid-range, mostly 0.6 mm.
Therefore, identification of aluminum buckle, in addition to pay attention to the surface finish givers, but also to observe the board thickness is uniform, hand pinch board feel, flexibility and toughness is good
5052 aluminum plate has many specifications, including panel width and the thickness of the plate, the height of the flanging etc.. Selection should be selected according to the characteristics of the home bathroom. Aluminum buckle into the surface of a punching and plane two. The surface piercing can ventilation sound-absorbing, laying a layer of soft film internal gusset plate, moisture can through punching be film absorption, so it is the most suitable for kitchen use more water. The market of 600mm * 600mm microporous square plate, F297H30 slat and M185H20 aluminum buckle was most widely used most widely.
In fact, 0.6 mm is enough. In the market of greater fame some imported brands of aluminous gusset plate as an example, the price per square metre in 300 yuan or more, but what is the thickness of it? 0.5 mm, less than 0.6 mm! Why, the board is not good or bad, but in the thickness of the substrate. In fact, if you seek advice is aluminum buckle brand name, mid-range, mostly 0.6 mm.
Therefore, identification of aluminum buckle, in addition to pay attention to the surface finish givers, but also to observe the board thickness is uniform, hand pinch board feel, flexibility and toughness is good