07-09-2019, 08:27 AM
The tape foil is used for the aluminum foil layer on the surface of the aluminum foil tape. The customer needs to apply glue on one side and then cut into narrow strips to make tape. The delivery status is O status. The requirements of this type of product are low, and there are no obvious large pinholes on the surface (to prevent leakage of glue) and oil stains (to prevent leakage of glue). The requirements on the plate type are not high, and there is no requirement for performance, especially elongation, but the material cannot be too hard.
Unlike our common double-sided tapes, scotch tapes, sealing tapes, tape foils are rarely used in our normal life, and are used in many electrical processing plants. But even if we use it very little, it is still an indispensable part of our daily life. We often use refrigerators, cars, air conditioners, computers and other places.
Mingtai commonly used 1 and 8 series of tape foils are put into production in aluminum foil tape. The thickness of the tape foil is 0.016-0.4mm and the width is 200-1400mm. The aluminum foil tape made of tape foil produced by Mingtai is suitable for each. Electromagnetic shielding is required in various electronic products such as transformers, mobile phones, computer peripherals, PDAs, PDPs, LED displays, and copiers. It is also a new self-adhesive and UV-resistant anti-corrosion protection material. It can be used for corrosion protection of oil, gas, water, heating overhead pipes or tower structures in natural gas, petroleum, chemical, urban construction. protection.
www.aluminumsheet-manufacturer.com
Unlike our common double-sided tapes, scotch tapes, sealing tapes, tape foils are rarely used in our normal life, and are used in many electrical processing plants. But even if we use it very little, it is still an indispensable part of our daily life. We often use refrigerators, cars, air conditioners, computers and other places.
Mingtai commonly used 1 and 8 series of tape foils are put into production in aluminum foil tape. The thickness of the tape foil is 0.016-0.4mm and the width is 200-1400mm. The aluminum foil tape made of tape foil produced by Mingtai is suitable for each. Electromagnetic shielding is required in various electronic products such as transformers, mobile phones, computer peripherals, PDAs, PDPs, LED displays, and copiers. It is also a new self-adhesive and UV-resistant anti-corrosion protection material. It can be used for corrosion protection of oil, gas, water, heating overhead pipes or tower structures in natural gas, petroleum, chemical, urban construction. protection.
www.aluminumsheet-manufacturer.com