What should we note when 5052 aluminum is pre-stretched
aluhm > 12-26-2017, 02:37 AM
Aluminum in the course of the use of a variety of processing methods, which are stretched, stretching aluminum is produced by the aluminum plate after stretching made of aluminum and aluminum parts, 5052 alloy in the course of the use of often need to stretch Time, but the tensile aluminum is generally not too hard, too hard will pull the explosion, so the elongation of aluminum and tensile strength according to the tensile - height and tension will have different requirements, so 5052 alloy in the pull There are some things to note in the process.
Stretching aluminum is in the production of aluminum out of the implementation of stretching technology, the use of processing, there is a process in the increase in the process of stretching, in order to eliminate the aluminum plate stress and strengthen the flatness, which is called pre-pull Stretch, suitable for high hardness of the alloy, 5052 aluminum in the production process for its increase in flatness will also use pre-stretching technology, but to the hardness range. Casting and hot-rolled plates can be used for stretching, but the effect of casting and rolling is not ideal, so the commonly said drawing plate is generally hot-rolled plate.
haomei Aluminum focused on the production of aluminum 20 years with advanced production equipment and processing technology, the alloy drawing process to master more accurate, has a good experience, 5052 aluminum in the drawing process in addition to pay attention to the tensile height, their hardness , But also pay attention to their own performance, the product to achieve the best results, their performance can not be damaged in the process of stretching, to give full play to the performance advantages of the product.