<p>
An aluminium flat strip is named in relative to profile
aluminium strip like aluminum led strip and
aluminum strip with holes. It is a belt type <strong>
aluminium coil</strong> of a narrow width (10-500mm). The manufacturing process is just like this. An
aluminum coil roll is fed into a slitting machine and cut into narrower belts which will be further processed into winding parts of transformers, lighting ornaments, hardware units and so on. Few aluminium flat strip manufacturers would have large stocks, for clients usually require differed width and specifications, and ready strips tend to become wastes if they do not meet requirements of future clients, which causes waste in process and raw materials.<br></p>
<p>
<strong>Aluminium flat strip</strong> products of some uses are of regular specifications, but it’s still difficult to produce them in advance, for they can be further classified. Take transformer
aluminium strip for example. It’s usually made of 1060 aluminium. This is stable, but it’s not the same case with its thickness and with. The thickness of the strip ranges from 0.2mm to 2.0mm. This include many scopes like 0.2-0.4mm, 0.4-0.8mm, 0.9-1.1mm, 1.2-1.6mm, 1.8-2.0mm etc. And the width covers the scope between 100mm and 1250mm. Therefore, it’s really hard to have
aluminium strips of all these specifications in stock, unless a supplier happen to have a small quantity of stock left by a previous order.</p>
<p>
In addition to 1060, 3003, 3003, 3a21, 3105 and 5052 are regular alloys for aluminium flat strip rolls, too. They are used in bottle caps, heat sinks, window blinds, buttonholes etc. Haomei supplies
aluminium strips of a thickness of 10mm above and width from 0.15mm to 3mm. Thicker or thinner ones can be customized. As a specialized<strong>
aluminium strip </strong>manufacturer, we have two production lines which is able to realized film coating during slitting. The width error can be controlled under 0.05mm, and both diameters can be customized. Welcome to contact us for more information!</p>