Technical characteristics of high quality aluminum circles
AriannaEr > 08-12-2020, 05:49 AM
<p>
Aluminum circles are usually processed by a punching machine. In the production line of the aluminum wafer from the rolls to flat , the material is cut into the shape you want the size and the finished product, and the aluminum circle scrap is removed. This type of production line is commonly used in aluminum processing and manufacturing industries such as cookware circles, lamp discs, tank heads, and many other items requiring aluminum circles.<br>
It is now enough for enterprises to produce a large number of circle aluminum production requirements. This production line is automatically selected from the width of the rolled material and the diameter of the aluminum circle blanks, and is directly processed on the whole roll of aluminum.<br>
Technical characteristics of high quality aluminum circles:<br>
1, the numerical control is fully automatic, the production line starts from coiling until the whole material is finished, and no manual contact is needed in the middle of the whole material, without any adjustment, the hidden danger of production safety and the hidden trouble of product quality are eliminated fundamentally.<br>
2. The line can be produced directly by the volume of the reel, without the longitudinal shear and cross cutting of the reel, reducing the production process, reducing the cost of production and reducing the possibility of the damage to the surface of the reel.<br>
3, this line makes full use of the width of the reel and uses the high precision servo motor drive system to minimize the distance between the <strong>aluminum circle sheet</strong> and the wafer to the edge of the material. It reduces the waste quantity fundamentally and makes the utilization of the raw material more than 80%.<br>
4, the production speed can reach 20-60 pieces per minute which improves the production efficiency.<br>
5, since modular design is adopted, the conversion time can be reduced to less than 15 minutes when the wafer production specifications are changed. The diameter range of the produced aluminum circle discs ranges from 100mm to 1000mm.<br>
6, advanced open book system, six type leveling machine, high rigidity mechanical press and automatic palletizing system ensure the <strong>high quality aluminum circl</strong>e products.<br></p>