M6 CMM clamping kit A with 300 mm x 300 mm aluminium plate
1-LVDCPN > 08-31-2018, 02:24 AM
This M6 CMM clamping kit can be used to hold brass, titanium, aluminium, plastic, ferrous and non-ferrous parts. It includes: an essential component set; a 300 mm x 300 mm base plate with M6 threaded holes spaced at 12.5 mm intervals; and a pair of plate clamps to mount the base plate to the CMM.
R-S-1320-6
Ø 13 mm x 20 mm standoff
3
R-S-1325-6
Ø 13 mm x 25 mm standoff
3
R-S-1350-6
Ø 13 mm x 50 mm standoff
3
R-S-1920-6
Ø 19 mm x 20 mm standoff
3
R-S-1925-6
Ø 19 mm x 25 mm standoff
3
R-S-1950-6
Ø 19 mm x 50 mm standoff
3
R-S-2520-6
Ø 25 mm x 20 mm standoff
3
R-S-2525-6
Ø 25 mm x 25 mm standoff
3
R-S-2550-6
Ø 25 mm x 50 mm standoff
3
R-SP-1325-6
Ø 13 mm x 25 mm pin standoff
2
R-CT-40-30-6
40 mm tension clamp with 30 mm post with M6 thread
2
R-CT-64-70-6
64 mm tension clamp with 70 mm post with M6 thread
4
R-RCD-6
Delrin® resting cone with M6 thread
4
R-AJ-13-6
Ø 13 mm adjustable jack stand with M6 thread
1
R-AS-45-6
45 mm long adjustable slide with M6 thread
1
R-AS-70-6
70 mm long adjustable slide with M6 thread
1
R-TC-500200
500 mm x 200 mm x 25 mm component tray to hold M6 and M8 components
1
R-BC10
50 mm x 200 mm x 150 mm compartment box (not shown)
1
Contact
Email:wade@haomeicn.com