<p>
<br>
How to clean <strong>plate aluminum </strong>during processing<br>
1. Rinse the surface of the board with plenty of water. The aim is to wet the surface of the plate aluminum.<br>
2. Wipe the <strong>aluminium floor plate</strong> with a soft cloth soaked with detergent, but pay attention to the dilution of detergent with clear water, otherwise it may cause corrosion to the
aluminium sheet and affect the use of the
aluminium alloy.<br>
3. Rinse the board with plenty of water and wash away the dirt.<br>
4. Check the surface of the <strong>aluminium durbar plate</strong> and clean the place with no detergent.<br>
5. If there is still any dry spot to be cleaned, continue again with the above method until the stain is cleaned.<br>
Notes: Do not clean the overheated surface (when the temperature is over 40 C), because the volatilization of excessive moisture is harmful to the surface paint! Particular attention should be paid to the selection of appropriate detergents. The basic principle is: neutral detergents must be selected! Do not use strong alkaline detergents such as potassium hydroxide, sodium hydroxide or sodium carbonate, strong acid detergents, corrosive detergents and paint soluble detergents.</p>