<p style="clear: both; font-size: 16px; white-space: normal;"></p>
<p>
<strong>China transformer
aluminum strip</strong> manufacturer Haomei can supply high quality 0.2-0.4mm 1060 O
aluminum strip for transformer winding without burr. The technical requirements on transformer
aluminum strip are conductivity control technology, surface quality and end face quality control technology. Nowadays, the
aluminum strip has replace copper strip popularized on transformers, the main reason is that the
aluminum strip transformer can save cost compared with the copper strip transformer and has strong economy. The use of
aluminum strip windings in the transformer has completely improved the sales price of the transformer and ensured the profit target of the transformer company.</p>
<br><p>
The edges of the transformer
aluminum strip include edge cut quality and edge treatment as rounded corner or rounded edges. According to the shear theory, the deformation during the shearing process of the <strong>transformer
aluminum strip</strong> can be divided into plastic deformation process and tear deformation process. During the plastic deformation process, the deformation zone is a uniform smooth surface, while in the tear deformation zone, the metal is expressed as a metal tearing, which is also the process of burr generation, the burrs generated during the shearing process are unidirectional vertical burrs. Therefore, the removal of the burr of
aluminum strip for transformer should be based on the characteristics of the burr in the shearing, and the design of the process and equipment.</p>
<br><p>
For the general requirements, the <strong>china transformer
aluminum strip</strong> can control the strip burr after the strip shear by controlling the shear quality, and for the highly required transformer
aluminum strip, in addition to the need to control the shear quality, but also need specialized processing for the edge.</p>