The waste in production has been always a big trouble for the manufacturer of
aluminum products such as lamps, transformer winding, fins, caps,etc. If there is too much waste in production, it will increase the product cost virtually.At this time, if bendable
aluminum strips are used, it can effectively reduce waste, thus decreasing production cost. Therefore, for some lamps and utensils manufacturing enterprises, it is recommended to use flexible
aluminum strips.Generally, the
aluminum strip is processed by slitting and is produced according to the width required by the order. During the processing, the width tolerance and surface quality can be better guaranteed.Now the bendable
aluminum strip has become the first choice for many lighting companies such as LED strips. As the above mentioned, it can save production cost. At the same time, it can simply the production process. If the raw material is
aluminum coil, you have to cut and pay attention to the problems during cutting process such as scratches. With
aluminum strip, this process is saved.If you plan to buy soft
aluminum strip, Haomei Aluminum,
aluminium strip supplier, like to make a simple introduction of its manufacturing process:1. Choose an
aluminum coil of appropriate thickness. Before processing, make sure that the thickness of the
aluminum coil is right.2. Adjust the slitting width of the slitting equipment according to the actual required width. With rich experience, Haomei Aluminum can control the width tolerance within 0.05 mm. The slit
aluminum strip must have the same width, neat edges and no burrs.