The aluminum checker plate refers to the
aluminum plate with a thickness in the range of 0.2-500 mm, the width of 200mm and the length of 16m. It is of rich patterns such as diamond, five bar, orange peel,etc.According the the thickness, the aluminum tread plate can be divided into thin
aluminum sheet, standard
aluminum sheet, medium
aluminum sheet and thick
aluminum sheet. Thin
aluminum sheet is between 0.15mm and 2.0mm. 2mm aluminium checker plate is a commonly used kind.The thickness of the standard plate is between 2.0mm and 6.0mm. The aluminium checker plate 6mm is also a popular kind among customers. The medium
aluminum sheet is between 6.0mm and 25.0mm, and the thickness of the thick plate is between 25mm and 200mm.During the manufacturing process, the common sizes are 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 7.0mm, 8.0mm, and its width must be within the range Between 600mm-1800mm.According to alloys, it can be divided into ordinary
aluminum plate,Aluminum-manganese embossed
aluminum sheet and Aluminum-magnesium stucco embossed
aluminum sheet.Ordinary series: it is made of 1060
aluminum alloy plate, which can adapt to the normal environment and is of low price. It is often used in outer packaging.Aluminum-manganese series: Its typical one is 3003 aluminum diamond plate. It belongs to an anti-rust
aluminum sheet. The strength is slightly higher than that of ordinary aluminum tread plate.Aluminum-magnesium alloy: it is processed from 5 series
aluminum sheet such as 5052 or 5083
aluminum sheet. This series has good corrosion resistance, high hardness and excellent rust resistance, which is usually used in special places, such as ships, carriages and other humid environments.