Aluminum sheet is one of the important products in the field of aluminum processing. According to the alloy grade, it can be divided into 8 alloys, among which. The 7-series alloy is an Al-Zn-Mg alloy, which is a heat treatable alloy. It belongs to the aviation series and is a relatively high-end field in aluminum sheets. The 7705 aluminum plate, which is a representative product of the 7XXX series, mainly contains zinc. Also belonging to the aviation series, it is an aluminum-magnesium-zinc-copper alloy, which can be heat-treated. It belongs to super-hard aluminum alloy and has good wear resistance.
The 7-series alloy is usually used as a material for welding members, or as an aircraft material, and is represented by a super-hard aluminum alloy 7075 alloy. The
7075 aluminum plate is mostly used to manufacture aircraft structures and other high-stress structural parts that require high strength and high corrosion resistance, such as upper and lower airfoil panels and bulkheads. After solution treatment, the plasticity is good, the heat treatment strengthening effect is particularly good, the strength is higher than 150 degrees, and the low temperature strength is particularly good, the welding performance is poor, and there is a tendency of stress corrosion cracking.
In recent years, sporting goods such as ski poles and golf clubs have also been produced using such alloys. For the heat treatment of 7075 alloy aluminum plate, T651 is used. This treatment can make the residual stress after T6 treatment uniformized by stretching correction to prevent the workpiece from being twisted and deformed during processing. T73 treatment will reduce the mechanical properties, but it has the effect of reducing the tendency of stress corrosion.
https://www.mt-aluminum.com/7075-aluminu...minum.html