Index

• ask aluminium Forum
• My Category
• Selling Leads
• 5086 aluminum machinability in China aluminum sheet manufacturer and supplier

5086 aluminum machinability in China aluminum sheet manufacturer and supplier

mingtaialu > 07-25-2019, 07:58 AM

5086 aluminum machinability in China aluminum sheet manufacturer and supplier

China aluminum sheet manufacturer and supplier supply 5086 aluminum machinability

henan mingtai aluminum is a professional [b]5086 aluminum[/b] with more than 20 years’ experience. Our main products include: various alloy of aluminum sheet, strip, foil, aluminum embossed sheet, diamond aluminum sheet, aluminum foil . mingtai aluminum China can 5086 aluminum with many alloy and tempers, and it can be cut to size at customers` need.

5086 is an aluminium alloy, primarily alloyed with magnesium. It is not strengthened by heat treatment, instead becoming stronger due to strain hardening, or cold mechanical working of the material.

Since heat treatment doesn't strongly affect the strength, 5086 can be readily welded and retain most of its mechanical strength. The good results with welding and good corrosion properties in seawater make 5086 extremely popular for vessel gangways, building boat and yacht hulls.

Welding properities of China [b]aluminum sheet manufacturer[/b] and supplier supply 5086 aluminum machinability

5086 aluminum is often assembled using arc welding, typically MIG or TIG welding. The newer technique of Friction stir welding has also been successfully applied but is not in common use.

Arc welding reduces mechanical properties to no worse than –O hardening condition. For –H116 base material, measured at 20 °C (68 °F) ambient temperature, yield strength decreases from 210 MPa (30 ksi) to 120 MPa (17 ksi) and ultimate strength from 290 to 260 MPa (42 to 38 ksi). The relatively low decrease in ultimate strength (about 10%) is extremely good performance for an aluminium alloy.

 

Our advantages of 5086 aluminum machinability in China aluminum sheet manufacturer and supplier

We have one 1+2 hot rolling production line, six 2450mm, 2050mm, 1650mm, 1450mm cold rolling lines, two 1650mm foil rolling production lines, two 1850mm continuous rolling production lines and one roll coating production line. These equipment enables us to provide quality checkered plates products for our customers.