There is aluminum nose wire for nose clips. Also called aluminum nose bridge strip. It needs pressing by hands to make the upper end of the mask is close to the nose bridge. Then stretch the mask down so that the mask does not leave wrinkles and better cover the nose and mouth.The common
aluminum strips for mask are 1000 and 3000
aluminum strip. One of the main kind is 1060 aluminum nose wire. It has the following properties:1. 1060 aluminum has good elongation,high formability and tensile strength, which can meet the conventional processing requirements (stamping, stretching).2. 1060
aluminum strip has high plasticity, corrosion resistance, electrical conductivity and thermal conductivity, but the strength is low.3. It can undertake gas welding, hydrogen atom welding and contact welding,which is not easy to braze.4. It is easy to withstand various pressure processing, extending and bending.What Haomei Aluminum offers for you is: 1060 H24
aluminum strip for face mask:1060
aluminum strip with or without glue are both available. It only needs stamping into aluminum nose wire. This
aluminum strip is of smooth surface, no scratches, no rebound, good shaping effect and environment protection.Haomei Alumnum can determine the processing according to the sizes of aluminum nose strips for N95 masks. Its specifications:1. Aluminum alloy: 10602. Temper: O3. Surface: Mill finish4. Thickness: 0.4*0.5 mm5. Width: 90-100 mm